Files
grub/grub-core/kern/efi/init.c
T
Glenn Washburn c016a969d1 gdb: Add gdbinfo command for printing the load address of the EFI application
EFI firmware determines where to load the GRUB EFI at runtime, and so the
addresses of debug symbols are not known ahead of time. There is a command
defined in the gdb_grub script which will load the debug symbols at the
appropriate addresses, if given the application load address for GRUB.
So add a command named "gdbinfo" to allow the user to print this GDB command
string with the application load address on-demand. For the outputted GDB
command to have any effect when entered into a GDB session, GDB should have
been started with the script as an argument to the -x option or sourced into
an active GDB session before running the outputted command.

Documentation for the gdbinfo command is also added.

Co-developed-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2023-06-01 12:10:04 +02:00

171 lines
4.2 KiB
C

/* init.c - generic EFI initialization and finalization */
/*
* GRUB -- GRand Unified Bootloader
* Copyright (C) 2006,2007 Free Software Foundation, Inc.
*
* GRUB is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* GRUB is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with GRUB. If not, see <http://www.gnu.org/licenses/>.
*/
#include <grub/efi/efi.h>
#include <grub/efi/console.h>
#include <grub/efi/debug.h>
#include <grub/efi/disk.h>
#include <grub/efi/sb.h>
#include <grub/lockdown.h>
#include <grub/term.h>
#include <grub/misc.h>
#include <grub/env.h>
#include <grub/mm.h>
#include <grub/kernel.h>
#include <grub/stack_protector.h>
#ifdef GRUB_STACK_PROTECTOR
static grub_efi_char16_t stack_chk_fail_msg[] =
L"* GRUB: STACK SMASHING DETECTED!!! *\r\n"
L"* GRUB: ABORTED!!! *\r\n"
L"* GRUB: REBOOTING IN 5 SECONDS... *\r\n";
static grub_guid_t rng_protocol_guid = GRUB_EFI_RNG_PROTOCOL_GUID;
/*
* Don't put this on grub_efi_init()'s local stack to avoid it
* getting a stack check.
*/
static grub_efi_uint8_t stack_chk_guard_buf[32];
grub_addr_t __stack_chk_guard;
void __attribute__ ((noreturn))
__stack_chk_fail (void)
{
grub_efi_simple_text_output_interface_t *o;
/*
* Use ConOut here rather than StdErr. StdErr only goes to
* the serial console, at least on EDK2.
*/
o = grub_efi_system_table->con_out;
o->output_string (o, stack_chk_fail_msg);
grub_efi_system_table->boot_services->stall (5000000);
grub_efi_system_table->runtime_services->reset_system (GRUB_EFI_RESET_SHUTDOWN,
GRUB_EFI_ABORTED, 0, NULL);
/*
* We shouldn't get here. It's unsafe to return because the stack
* is compromised and this function is noreturn, so just busy
* loop forever.
*/
do
{
/* Do not optimize out the loop. */
asm volatile ("");
}
while (1);
}
static void
stack_protector_init (void)
{
grub_efi_rng_protocol_t *rng;
/* Set up the stack canary. Make errors here non-fatal for now. */
rng = grub_efi_locate_protocol (&rng_protocol_guid, NULL);
if (rng != NULL)
{
grub_efi_status_t status;
status = rng->get_rng (rng, NULL, sizeof (stack_chk_guard_buf),
stack_chk_guard_buf);
if (status == GRUB_EFI_SUCCESS)
grub_memcpy (&__stack_chk_guard, stack_chk_guard_buf, sizeof (__stack_chk_guard));
}
}
#else
static void
stack_protector_init (void)
{
}
#endif
grub_addr_t grub_modbase;
void
grub_efi_init (void)
{
grub_modbase = grub_efi_section_addr ("mods");
/* First of all, initialize the console so that GRUB can display
messages. */
grub_console_init ();
stack_protector_init ();
/* Initialize the memory management system. */
grub_efi_mm_init ();
/*
* Lockdown the GRUB and register the shim_lock verifier
* if the UEFI Secure Boot is enabled.
*/
if (grub_efi_get_secureboot () == GRUB_EFI_SECUREBOOT_MODE_ENABLED)
{
grub_lockdown ();
grub_shim_lock_verifier_setup ();
}
grub_efi_system_table->boot_services->set_watchdog_timer (0, 0, 0, NULL);
grub_efidisk_init ();
grub_efi_register_debug_commands ();
}
void (*grub_efi_net_config) (grub_efi_handle_t hnd,
char **device,
char **path);
void
grub_machine_get_bootlocation (char **device, char **path)
{
grub_efi_loaded_image_t *image = NULL;
char *p;
image = grub_efi_get_loaded_image (grub_efi_image_handle);
if (!image)
return;
*device = grub_efidisk_get_device_name (image->device_handle);
if (!*device && grub_efi_net_config)
{
grub_efi_net_config (image->device_handle, device, path);
return;
}
*path = grub_efi_get_filename (image->file_path);
if (*path)
{
/* Get the directory. */
p = grub_strrchr (*path, '/');
if (p)
*p = '\0';
}
}
void
grub_efi_fini (void)
{
grub_efidisk_fini ();
grub_console_fini ();
}