mirror of
https://git.savannah.gnu.org/git/grub.git
synced 2026-10-20 22:48:22 +00:00
493 lines
15 KiB
C
493 lines
15 KiB
C
/**************************************************************************
|
|
Etherboot - BOOTP/TFTP Bootstrap Program
|
|
LANCE NIC driver for Etherboot
|
|
Large portions borrowed from the Linux LANCE driver by Donald Becker
|
|
Ken Yap, July 1997
|
|
***************************************************************************/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2, or (at
|
|
* your option) any later version.
|
|
*/
|
|
|
|
/* to get some global routines like printf */
|
|
#include "etherboot.h"
|
|
/* to get the interface to the body of the program */
|
|
#include "nic.h"
|
|
#ifdef INCLUDE_LANCE
|
|
#include "pci.h"
|
|
#endif
|
|
#include "cards.h"
|
|
|
|
/* Offsets from base I/O address */
|
|
#if defined(INCLUDE_NE2100) || defined(INCLUDE_LANCE)
|
|
#define LANCE_ETH_ADDR 0x0
|
|
#define LANCE_DATA 0x10
|
|
#define LANCE_ADDR 0x12
|
|
#define LANCE_RESET 0x14
|
|
#define LANCE_BUS_IF 0x16
|
|
#define LANCE_TOTAL_SIZE 0x18
|
|
#endif
|
|
#ifdef INCLUDE_NI6510
|
|
#define LANCE_ETH_ADDR 0x8
|
|
#define LANCE_DATA 0x0
|
|
#define LANCE_ADDR 0x2
|
|
#define LANCE_RESET 0x4
|
|
#define LANCE_BUS_IF 0x6
|
|
#define LANCE_TOTAL_SIZE 0x10
|
|
#endif
|
|
|
|
struct lance_init_block
|
|
{
|
|
unsigned short mode;
|
|
unsigned char phys_addr[6];
|
|
unsigned long filter[2];
|
|
Address rx_ring;
|
|
Address tx_ring;
|
|
};
|
|
|
|
struct lance_rx_head
|
|
{
|
|
union {
|
|
Address base;
|
|
char addr[4];
|
|
} u;
|
|
short buf_length; /* 2s complement */
|
|
short msg_length;
|
|
};
|
|
|
|
struct lance_tx_head
|
|
{
|
|
union {
|
|
Address base;
|
|
char addr[4];
|
|
} u;
|
|
short buf_length; /* 2s complement */
|
|
short misc;
|
|
};
|
|
|
|
struct lance_interface
|
|
{
|
|
struct lance_init_block init_block;
|
|
struct lance_rx_head rx_ring;
|
|
struct lance_tx_head tx_ring;
|
|
unsigned char rbuf[ETH_MAX_PACKET];
|
|
unsigned char tbuf[ETH_MAX_PACKET];
|
|
};
|
|
|
|
#define LANCE_MUST_PAD 0x00000001
|
|
#define LANCE_ENABLE_AUTOSELECT 0x00000002
|
|
#define LANCE_MUST_UNRESET 0x00000008
|
|
|
|
/* A mapping from the chip ID number to the part number and features.
|
|
These are from the datasheets -- in real life the '970 version
|
|
reportedly has the same ID as the '965. */
|
|
static struct lance_chip_type
|
|
{
|
|
int id_number;
|
|
const char *name;
|
|
int flags;
|
|
} chip_table[] = {
|
|
{0x0000, "LANCE 7990", /* Ancient lance chip. */
|
|
LANCE_MUST_PAD + LANCE_MUST_UNRESET},
|
|
{0x0003, "PCnet/ISA 79C960", /* 79C960 PCnet/ISA. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
{0x2260, "PCnet/ISA+ 79C961", /* 79C961 PCnet/ISA+, Plug-n-Play. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
{0x2420, "PCnet/PCI 79C970", /* 79C970 or 79C974 PCnet-SCSI, PCI. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
/* Bug: the PCnet/PCI actually uses the PCnet/VLB ID number, so just call
|
|
it the PCnet32. */
|
|
{0x2430, "PCnet32", /* 79C965 PCnet for VL bus. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
{0x2621, "PCnet/PCI-II 79C970A", /* 79C970A PCInetPCI II. */
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
{0x0, "PCnet (unknown)",
|
|
LANCE_ENABLE_AUTOSELECT},
|
|
};
|
|
|
|
/* Define a macro for converting program addresses to real addresses */
|
|
#ifdef ETHERBOOT32
|
|
#undef virt_to_bus
|
|
#define virt_to_bus(x) ((unsigned long)x)
|
|
#endif
|
|
#ifdef ETHERBOOT16
|
|
#define virt_to_bus(x) (((Address)x)+RELOC)
|
|
#endif /* ETHERBOOT16 */
|
|
|
|
static int chip_version;
|
|
static unsigned short ioaddr;
|
|
static int dma;
|
|
static struct lance_interface *lp;
|
|
|
|
/* additional 8 bytes for 8-byte alignment space */
|
|
#ifndef USE_INTERNAL_BUFFER
|
|
#define lance ((char *)0x10000 - (sizeof(struct lance_interface)+8))
|
|
#else
|
|
static char lance[sizeof(struct lance_interface)+8];
|
|
#endif
|
|
|
|
|
|
#ifndef INCLUDE_LANCE
|
|
/* DMA defines and helper routines */
|
|
|
|
/* DMA controller registers */
|
|
#define DMA1_CMD_REG 0x08 /* command register (w) */
|
|
#define DMA1_STAT_REG 0x08 /* status register (r) */
|
|
#define DMA1_REQ_REG 0x09 /* request register (w) */
|
|
#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
|
|
#define DMA1_MODE_REG 0x0B /* mode register (w) */
|
|
#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
|
|
#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
|
|
#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
|
|
#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
|
|
#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
|
|
|
|
#define DMA2_CMD_REG 0xD0 /* command register (w) */
|
|
#define DMA2_STAT_REG 0xD0 /* status register (r) */
|
|
#define DMA2_REQ_REG 0xD2 /* request register (w) */
|
|
#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
|
|
#define DMA2_MODE_REG 0xD6 /* mode register (w) */
|
|
#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
|
|
#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
|
|
#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
|
|
#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
|
|
#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
|
|
|
|
|
|
#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
|
|
#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
|
|
#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
|
|
|
|
/* enable/disable a specific DMA channel */
|
|
static void enable_dma(unsigned int dmanr)
|
|
{
|
|
if (dmanr <= 3)
|
|
outb_p(dmanr, DMA1_MASK_REG);
|
|
else
|
|
outb_p(dmanr & 3, DMA2_MASK_REG);
|
|
}
|
|
|
|
static void disable_dma(unsigned int dmanr)
|
|
{
|
|
if (dmanr <= 3)
|
|
outb_p(dmanr | 4, DMA1_MASK_REG);
|
|
else
|
|
outb_p((dmanr & 3) | 4, DMA2_MASK_REG);
|
|
}
|
|
|
|
/* set mode (above) for a specific DMA channel */
|
|
static void set_dma_mode(unsigned int dmanr, char mode)
|
|
{
|
|
if (dmanr <= 3)
|
|
outb_p(mode | dmanr, DMA1_MODE_REG);
|
|
else
|
|
outb_p(mode | (dmanr&3), DMA2_MODE_REG);
|
|
}
|
|
#endif /* !INCLUDE_LANCE */
|
|
|
|
/**************************************************************************
|
|
RESET - Reset adapter
|
|
***************************************************************************/
|
|
static void lance_reset(struct nic *nic)
|
|
{
|
|
int i;
|
|
Address l;
|
|
|
|
/* Reset the LANCE */
|
|
(void)inw(ioaddr+LANCE_RESET);
|
|
/* Un-Reset the LANCE, needed only for the NE2100 */
|
|
if (chip_table[chip_version].flags & LANCE_MUST_UNRESET)
|
|
outw(0, ioaddr+LANCE_RESET);
|
|
if (chip_table[chip_version].flags & LANCE_ENABLE_AUTOSELECT)
|
|
{
|
|
/* This is 79C960 specific; Turn on auto-select of media
|
|
(AUI, BNC). */
|
|
outw(0x2, ioaddr+LANCE_ADDR);
|
|
/* Don't touch 10base2 power bit. */
|
|
outw(inw(ioaddr+LANCE_BUS_IF) | 0x2, ioaddr+LANCE_BUS_IF);
|
|
}
|
|
/* Re-initialise the LANCE, and start it when done. */
|
|
/* Set station address */
|
|
for (i = 0; i < ETHER_ADDR_SIZE; ++i)
|
|
lp->init_block.phys_addr[i] = nic->node_addr[i];
|
|
/* Preset the receive ring header */
|
|
lp->rx_ring.buf_length = -ETH_MAX_PACKET;
|
|
/* OWN */
|
|
lp->rx_ring.u.base = virt_to_bus(lp->rbuf) & 0xffffff;
|
|
/* we set the top byte as the very last thing */
|
|
lp->rx_ring.u.addr[3] = 0x80;
|
|
lp->init_block.mode = 0x0; /* enable Rx and Tx */
|
|
l = (Address)virt_to_bus(&lp->init_block);
|
|
outw(0x1, ioaddr+LANCE_ADDR);
|
|
(void)inw(ioaddr+LANCE_ADDR);
|
|
outw((short)l, ioaddr+LANCE_DATA);
|
|
outw(0x2, ioaddr+LANCE_ADDR);
|
|
(void)inw(ioaddr+LANCE_ADDR);
|
|
outw((short)(l >> 16), ioaddr+LANCE_DATA);
|
|
outw(0x4, ioaddr+LANCE_ADDR);
|
|
(void)inw(ioaddr+LANCE_ADDR);
|
|
outw(0x915, ioaddr+LANCE_DATA);
|
|
outw(0x0, ioaddr+LANCE_ADDR);
|
|
(void)inw(ioaddr+LANCE_ADDR);
|
|
outw(0x4, ioaddr+LANCE_DATA); /* stop */
|
|
outw(0x1, ioaddr+LANCE_DATA); /* init */
|
|
for (i = 100; i > 0; --i)
|
|
if (inw(ioaddr+LANCE_DATA) & 0x100)
|
|
break;
|
|
/* Apparently clearing the InitDone bit here triggers a bug
|
|
in the '974. (Mark Stockton) */
|
|
outw(0x2, ioaddr+LANCE_DATA); /* start */
|
|
}
|
|
|
|
/**************************************************************************
|
|
POLL - Wait for a frame
|
|
***************************************************************************/
|
|
static int lance_poll(struct nic *nic)
|
|
{
|
|
int status;
|
|
|
|
status = lp->rx_ring.u.base >> 24;
|
|
if (status & 0x80)
|
|
return (0);
|
|
#ifdef DEBUG
|
|
printf("LANCE packet received rx_ring.u.base %X mcnt %x csr0 %x\n",
|
|
lp->rx_ring.u.base, lp->rx_ring.msg_length,
|
|
inw(ioaddr+LANCE_DATA));
|
|
#endif
|
|
if (status == 0x3)
|
|
memcpy(nic->packet, lp->rbuf, nic->packetlen = lp->rx_ring.msg_length);
|
|
/* Andrew Boyd of QNX reports that some revs of the 79C765
|
|
clear the buffer length */
|
|
lp->rx_ring.buf_length = -ETH_MAX_PACKET;
|
|
lp->rx_ring.u.addr[3] |= 0x80; /* prime for next receive */
|
|
outw(0x0, ioaddr+LANCE_ADDR);
|
|
(void)inw(ioaddr+LANCE_ADDR);
|
|
outw(0x500, ioaddr+LANCE_DATA); /* clear receive + InitDone */
|
|
return (status == 0x3);
|
|
}
|
|
|
|
/**************************************************************************
|
|
TRANSMIT - Transmit a frame
|
|
***************************************************************************/
|
|
static void lance_transmit(
|
|
struct nic *nic,
|
|
const char *d, /* Destination */
|
|
unsigned int t, /* Type */
|
|
unsigned int s, /* size */
|
|
const char *p) /* Packet */
|
|
{
|
|
unsigned long time;
|
|
|
|
/* copy the packet to ring buffer */
|
|
memcpy(lp->tbuf, d, ETHER_ADDR_SIZE); /* dst */
|
|
memcpy(&lp->tbuf[ETHER_ADDR_SIZE], nic->node_addr, ETHER_ADDR_SIZE); /* src */
|
|
lp->tbuf[ETHER_ADDR_SIZE+ETHER_ADDR_SIZE] = t >> 8; /* type */
|
|
lp->tbuf[ETHER_ADDR_SIZE+ETHER_ADDR_SIZE+1] = t; /* type */
|
|
memcpy(&lp->tbuf[ETHER_HDR_SIZE], p, s);
|
|
s += ETHER_HDR_SIZE;
|
|
if (chip_table[chip_version].flags & LANCE_MUST_PAD)
|
|
while (s < ETH_MIN_PACKET) /* pad to min length */
|
|
lp->tbuf[s++] = 0;
|
|
lp->tx_ring.buf_length = -s;
|
|
lp->tx_ring.misc = 0x0;
|
|
/* OWN, STP, ENP */
|
|
lp->tx_ring.u.base = virt_to_bus(lp->tbuf) & 0xffffff;
|
|
/* we set the top byte as the very last thing */
|
|
lp->tx_ring.u.addr[3] = 0x83;
|
|
/* Trigger an immediate send poll */
|
|
outw(0x0, ioaddr+LANCE_ADDR);
|
|
outw(0x48, ioaddr+LANCE_DATA);
|
|
/* wait for transmit complete */
|
|
time = currticks() + TICKS_PER_SEC; /* wait one second */
|
|
while (currticks() < time && (lp->tx_ring.u.base & 0x80000000) != 0)
|
|
;
|
|
if ((lp->tx_ring.u.base & 0x80000000) != 0)
|
|
printf("LANCE timed out on transmit\n");
|
|
(void)inw(ioaddr+LANCE_ADDR);
|
|
outw(0x200, ioaddr+LANCE_DATA); /* clear transmit + InitDone */
|
|
#ifdef DEBUG
|
|
printf("tx_ring.u.base %X tx_ring.buf_length %x tx_ring.misc %x csr0 %x\n",
|
|
lp->tx_ring.u.base, lp->tx_ring.buf_length, lp->tx_ring.misc,
|
|
inw(ioaddr+LANCE_DATA));
|
|
#endif
|
|
}
|
|
|
|
static void lance_disable(struct nic *nic)
|
|
{
|
|
#ifndef INCLUDE_LANCE
|
|
disable_dma(dma);
|
|
#endif
|
|
}
|
|
|
|
#ifdef INCLUDE_LANCE
|
|
static int lance_probe1(struct nic *nic, struct pci_device *pci)
|
|
#else
|
|
static int lance_probe1(struct nic *nic)
|
|
#endif
|
|
{
|
|
int reset_val, lance_version;
|
|
unsigned int i;
|
|
Address l;
|
|
short dma_channels;
|
|
static const char dmas[] = { 5, 6, 7, 3 };
|
|
|
|
reset_val = inw(ioaddr+LANCE_RESET);
|
|
outw(reset_val, ioaddr+LANCE_RESET);
|
|
#if 1 /* Klaus Espenlaub -- was #ifdef INCLUDE_NE2100*/
|
|
outw(0x0, ioaddr+LANCE_ADDR); /* Switch to window 0 */
|
|
if (inw(ioaddr+LANCE_DATA) != 0x4)
|
|
return (-1);
|
|
#endif
|
|
outw(88, ioaddr+LANCE_ADDR); /* Get the version of the chip */
|
|
if (inw(ioaddr+LANCE_ADDR) != 88)
|
|
lance_version = 0;
|
|
else
|
|
{
|
|
chip_version = inw(ioaddr+LANCE_DATA);
|
|
outw(89, ioaddr+LANCE_ADDR);
|
|
chip_version |= inw(ioaddr+LANCE_DATA) << 16;
|
|
if ((chip_version & 0xfff) != 0x3)
|
|
return (-1);
|
|
chip_version = (chip_version >> 12) & 0xffff;
|
|
for (lance_version = 1; chip_table[lance_version].id_number != 0; ++lance_version)
|
|
if (chip_table[lance_version].id_number == chip_version)
|
|
break;
|
|
}
|
|
/* make sure data structure is 8-byte aligned */
|
|
l = ((Address)lance + 7) & ~7;
|
|
lp = (struct lance_interface *)l;
|
|
lp->init_block.mode = 0x3; /* disable Rx and Tx */
|
|
lp->init_block.filter[0] = lp->init_block.filter[1] = 0x0;
|
|
/* top bits are zero, we have only one buffer each for Rx and Tx */
|
|
lp->init_block.rx_ring = virt_to_bus(&lp->rx_ring) & 0xffffff;
|
|
lp->init_block.tx_ring = virt_to_bus(&lp->tx_ring) & 0xffffff;
|
|
l = virt_to_bus(&lp->init_block);
|
|
outw(0x1, ioaddr+LANCE_ADDR);
|
|
(void)inw(ioaddr+LANCE_ADDR);
|
|
outw((unsigned short)l, ioaddr+LANCE_DATA);
|
|
outw(0x2, ioaddr+LANCE_ADDR);
|
|
(void)inw(ioaddr+LANCE_ADDR);
|
|
outw((unsigned short)(l >> 16), ioaddr+LANCE_DATA);
|
|
outw(0x4, ioaddr+LANCE_ADDR);
|
|
(void)inw(ioaddr+LANCE_ADDR);
|
|
outw(0x915, ioaddr+LANCE_DATA);
|
|
outw(0x0, ioaddr+LANCE_ADDR);
|
|
(void)inw(ioaddr+LANCE_ADDR);
|
|
#ifndef INCLUDE_LANCE
|
|
/* now probe for DMA channel */
|
|
dma_channels = ((inb(DMA1_STAT_REG) >> 4) & 0xf) |
|
|
(inb(DMA2_STAT_REG) & 0xf0);
|
|
/* need to fix when PCI provides DMA info */
|
|
for (i = 0; i < (sizeof(dmas)/sizeof(dmas[0])); ++i)
|
|
{
|
|
int j;
|
|
|
|
dma = dmas[i];
|
|
/* Don't enable a permanently busy DMA channel,
|
|
or the machine will hang */
|
|
if (dma_channels & (1 << dma))
|
|
continue;
|
|
outw(0x7f04, ioaddr+LANCE_DATA); /* clear memory error bits */
|
|
set_dma_mode(dma, DMA_MODE_CASCADE);
|
|
enable_dma(dma);
|
|
outw(0x1, ioaddr+LANCE_DATA); /* init */
|
|
for (j = 100; j > 0; --j)
|
|
if (inw(ioaddr+LANCE_DATA) & 0x900)
|
|
break;
|
|
if (inw(ioaddr+LANCE_DATA) & 0x100)
|
|
break;
|
|
else
|
|
disable_dma(dma);
|
|
}
|
|
if (i >= (sizeof(dmas)/sizeof(dmas[0])))
|
|
dma = 0;
|
|
printf("\n%s base 0x%x, DMA %d, addr ",
|
|
chip_table[lance_version].name, ioaddr, dma);
|
|
#else
|
|
printf(" %s base 0x%x, addr ", chip_table[lance_version].name, ioaddr);
|
|
#endif
|
|
/* Get station address */
|
|
for (i = 0; i < ETHER_ADDR_SIZE; ++i)
|
|
{
|
|
printf("%b", nic->node_addr[i] = inb(ioaddr+LANCE_ETH_ADDR+i));
|
|
if (i < ETHER_ADDR_SIZE -1)
|
|
printf(":");
|
|
}
|
|
putchar('\n');
|
|
if (chip_table[chip_version].flags & LANCE_ENABLE_AUTOSELECT) {
|
|
/* Turn on auto-select of media (10baseT or BNC) so that the
|
|
* user watch the LEDs. */
|
|
outw(0x0002, ioaddr+LANCE_ADDR);
|
|
/* Don't touch 10base2 power bit. */
|
|
outw(inw(ioaddr+LANCE_BUS_IF) | 0x0002, ioaddr+LANCE_BUS_IF);
|
|
}
|
|
return (lance_version);
|
|
}
|
|
|
|
/**************************************************************************
|
|
PROBE - Look for an adapter, this routine's visible to the outside
|
|
***************************************************************************/
|
|
|
|
#ifdef INCLUDE_LANCE
|
|
struct nic *lancepci_probe(struct nic *nic, unsigned short *probe_addrs, struct pci_device *pci)
|
|
#endif
|
|
#ifdef INCLUDE_NE2100
|
|
struct nic *ne2100_probe(struct nic *nic, unsigned short *probe_addrs)
|
|
#endif
|
|
#ifdef INCLUDE_NI6510
|
|
struct nic *ni6510_probe(struct nic *nic, unsigned short *probe_addrs)
|
|
#endif
|
|
{
|
|
unsigned short *p;
|
|
static unsigned short io_addrs[] = { 0x300, 0x320, 0x340, 0x360, 0 };
|
|
|
|
/* if probe_addrs is 0, then routine can use a hardwired default */
|
|
if (probe_addrs == 0)
|
|
probe_addrs = io_addrs;
|
|
for (p = probe_addrs; (ioaddr = *p) != 0; ++p)
|
|
{
|
|
char offset15, offset14 = inb(ioaddr + 14);
|
|
short pci_cmd;
|
|
|
|
#ifdef INCLUDE_NE2100
|
|
if ((offset14 == 0x52 || offset14 == 0x57) &&
|
|
((offset15 = inb(ioaddr + 15)) == 0x57 || offset15 == 0x44))
|
|
if (lance_probe1(nic) >= 0)
|
|
break;
|
|
#endif
|
|
#ifdef INCLUDE_NI6510
|
|
if ((offset14 == 0x00 || offset14 == 0x52) &&
|
|
((offset15 = inb(ioaddr + 15)) == 0x55 || offset15 == 0x44))
|
|
if (lance_probe1(nic) >= 0)
|
|
break;
|
|
#endif
|
|
#ifdef INCLUDE_LANCE
|
|
pcibios_read_config_word(0, pci->devfn, PCI_COMMAND, &pci_cmd);
|
|
if (!(pci_cmd & PCI_COMMAND_MASTER)) {
|
|
pci_cmd |= PCI_COMMAND_MASTER;
|
|
pcibios_write_config_word(0, pci->devfn, PCI_COMMAND, pci_cmd);
|
|
}
|
|
if (lance_probe1(nic, pci) >= 0)
|
|
break;
|
|
#endif
|
|
}
|
|
/* if board found */
|
|
if (ioaddr != 0)
|
|
{
|
|
/* point to NIC specific routines */
|
|
lance_reset(nic);
|
|
nic->reset = lance_reset;
|
|
nic->poll = lance_poll;
|
|
nic->transmit = lance_transmit;
|
|
nic->disable = lance_disable;
|
|
return nic;
|
|
}
|
|
/* else */
|
|
{
|
|
return 0;
|
|
}
|
|
}
|