* disk/ata.c (grub_ata_wait_not_busy): Add debug output of status
register.
(grub_atapi_identify): Add wait after drive select.
(grub_ata_identify): Do more strict status register check before
calling grub_atapi_identify (). Suppress error message if status
register is 0x00 after command failure. Add status register
check after PIO read to avoid bogus identify due to stuck DRQ.
Thanks to Pavel Roskin for testing.
(grub_device_initialize): Remove unsafe status register check.
Thanks to 'phcoder' for problem report and patch.
Prevent sign extension in debug message.
* kern/misc.c (grub_vsprintf): Fix size and termination of `format2'
(precision) digit string. Allow `.format2' without `format1' (width).
Limit input chars for `%s' output to `format2' if specified. This is
compatible with standard printf ().
* disk/ata.c (grub_ata_wait_status): Replace by ...
(grub_ata_wait_not_busy): ... this function. Checks only BSY bit,
other status bits may be invalid while BSY is asserted.
(grub_ata_check_ready): New function.
(grub_ata_cmd): Removed.
(grub_ata_wait_drq): New function.
(grub_ata_strncpy): Remove inline.
(grub_ata_pio_read): Reduce to actual block transfer. BSY wait
and error check now done by grub_ata_wait_drq ().
(grub_ata_pio_write): Likewise.
(grub_atapi_identify): Set DEV before check for !BSY. Use
grub_ata_wait_drq () to wait for data.
(grub_ata_device_initialize): Add status register check to
detect missing SATA slave devices. Add debug messages.
(grub_atapi_wait_drq): Use grub_ata_wait_not_busy ().
(grub_atapi_packet): Set DEV before check for !BSY. Replace
transfer loop by grub_ata_pio_write ().
(grub_ata_identify): Set DEV before check for !BSY. Use
grub_ata_wait_drq () to wait for data.
(grub_ata_setaddress): Set DEV before check for !BSY.
(grub_ata_readwrite): Remove duplicate code, handle batch/rest and
read/write in one loop. Fix invalid command on write. Fix incomplete
command on (size % batch) == 0. Add missing error check after write of
last block. Add debug messages.
(grub_atapi_read): Replace transfer loop by grub_ata_pio_read ().
* disk/ata.c (GRUB_ATAPI_REG_*): New defines.
(GRUB_ATAPI_IREASON_*): Likewise.
(grub_ata_pio_write): Fix timeout error return.
(grub_atapi_identify): Add grub_ata_wait () after cmd.
(grub_atapi_wait_drq): New function.
(grub_atapi_packet): New parameter `size'.
Use grub_atapi_wait_drq () and direct write instead of
grub_ata_pio_write ().
(grub_atapi_read): Replace grub_ata_pio_read () by a loop which
reads the number of bytes requested by the device for each DRQ
assertion.
(grub_atapi_write): Remove old implementation, return not
implemented instead.
* disk/scsi.c (grub_scsi_read10): Use scsi->blocksize instead
of 512 to calculate data size.
(grub_scsi_read12): Likewise.
(grub_scsi_write10): Likewise.
(grub_scsi_write12): Likewise.
(grub_scsi_read): Adjust size according to blocksize.
Add checks for invalid blocksize and unaligned transfer.
* disk/ata.c (enum grub_ata_commands): Remove EXEC_DEV_DIAGNOSTICS.
(enum grub_ata_timeout_milliseconds): New enum.
(grub_ata_wait_status): Add parameter milliseconds.
(grub_ata_cmd): Remove variable `err'. Remove wait for !DRQ to allow
recovery from timed-out commands.
(grub_ata_pio_read): Add parameter milliseconds. Fix error return,
return grub_errno instead of REG_ERROR.
(grub_ata_pio_write): Add parameter milliseconds.
(grub_atapi_identify): Fix size of ATAPI IDENTIFY sector.
Pass milliseconds to grub_ata_wait_status () and
grub_ata_pio_read ().
(grub_atapi_packet): Pass milliseconds to grub_ata_pio_write ().
(grub_ata_identify): Remove variable `ataerr'. Pass milliseconds to
grub_ata_wait_status (). Fix IDENTIFY timeout check.
(grub_ata_device_initialize): Remove EXECUTE DEVICE DIAGNOSTICS.
It is not suitable for device detection, because DEV bit is ignored,
the command may run too long, and not all devices set the signature
properly.
(grub_ata_pciinit): Clear grub_errno before grub_ata_device_initialize ().
(grub_ata_setaddress): Pass milliseconds to grub_ata_wait_status ().
Fix device selection, DEV bit must be set first to address the registers
of the correct device.
(grub_ata_readwrite): Pass milliseconds to grub_ata_wait_status () and
grub_ata_pio_read/write ().
(grub_atapi_read): Pass milliseconds to grub_ata_pio_read ().
(grub_atapi_write): Pass milliseconds to grub_ata_pio_write ().
* Makefile.in: Add `target_os' and `enable_grub_pe2elf'.
* conf/common.rmk: Install `grub-pe2elf' only if requested.
Install `grub.d/10_windows' only on Cygwin.
* configure.ac: Add subst of `target_os'.
Check `target_os' also before setting TARGET_OBJ2ELF.
Add `--enable-grub-pe2elf'.
* kern/i386/pit.c (TIMER2_SPEAKER): New define.
(TIMER2_GATE): Likewise.
(grub_pit_wait): Add enable/disable of the timer2 gate
bit of port 0x61. This fixes a possible infinite loop.
* util/update-grub.in: Add a check for admin
group on Cygwin.
Remove old `grub.cfg.new' before creation.
Add `-f' to `mv' to handle the different filesystem
semantics of Windows.
* util/i386/pc/grub-install.in: If `--debug' is specified,
pass `--verbose' to grub-setup.
Abort script if make_system_path_relative_to_its_root() fails.
* commands/cat.c (grub_cmd_cat): Remove non-ESC keys from keyboard queue
to ensure that break with ESC will always work.
* commands/sleep.c (grub_interruptible_millisleep): Likewise.
Remove ESC from keyboard queue.
* util/biosdisk.c: [__CYGWIN__] Add includes.
(grub_util_biosdisk_open): Use Linux code also for Cygwin.
(get_os_disk): Move variable declarations to OS specific
parts to avoid warning.
[__GNU__] (get_os_disk): Fix /dev/sdXsN case.
[__CYGWIN__] (get_os_disk): Add Cygwin /dev/sdXN device names.
(grub_util_biosdisk_get_grub_dev): Use Linux code also for
Cygwin.
* util/getroot.c: [__CYGWIN__] Add includes.
(strip_extra_slashes): Fix "/" case.
[__CYGWIN__] (get_win32_path): New function.
[__CYGWIN__] (grub_get_prefix): Add conversion to win32 path.
[__CYGWIN__] (find_root_device): Disable.
[__CYGWIN__] (get_bootsec_serial): New function.
[__CYGWIN__] (find_cygwin_root_device): Likewise.
[__linux__] (grub_guess_root_device): Add early returns to simplify
structure.
[__CYGWIN__] (grub_guess_root_device): Call find_cygwin_root_device.
[__linux__] (grub_util_get_dev_abstraction): Enable LVM and RAID
check for Linux only.
chrfranke