previous patch increased the size of the RS code by 20 bytes (at
least with gcc-4.4), so increase this by 20 bytes to match.
(GRUB_KERNEL_I386_PC_NO_REED_SOLOMON_PART): Likewise.
scratch area. Make sure to initialise chosen in standalone mode as
well as non-standalone.
Reported by: Robert Hooker and Andy Whitcroft.
Tested by: Andy Whitcroft.
comment. Add an extra layer of quotation, requiring the output of
this function to be used in a printf format string.
(gettext_printf): New function.
* util/grub.d/10_hurd.in: Use gettext_printf where appropriate.
Extract translatable strings from here-documents and use a temporary
variable instead, so that xgettext can find them.
* util/grub.d/10_kfreebsd.in: Likewise.
* util/grub.d/10_linux.in: Likewise.
* util/grub.d/20_linux_xen.in: Likewise.
* po/grub.d.sed: New file.
* po/Makefile.in.in ($(DOMAIN).pot-update): Extract gettext_printf
arguments. Set c-format flags on all strings extracted from
util/grub.d/ (xgettext refuses to include these itself for strings
it extracted from a shell file, but these really are c-format).
.mo/.mo.gz opening sequence to ...
(grub_mofile_open_lang): ... here.
(grub_gettext_init_ext): If opening ll_CC fails, try ll.
* util/grub.d/00_header.in (grub_lang): Include country part of
locale.
Reported by: Mario Limonciello.
* util/grub-probe.c (probe): Remember which disk was detected as
RAID (perhaps an LVM physical volume). Use that disk's raidname
rather than that of the top-level disk.
Remove byte-swapping function calls, which are not valid in
structure initialisers.
* grub-core/partmap/gpt.c (grub_gpt_partition_type_bios_boot): Make
non-const.
(GRUB_MOD_INIT): Byte-swap data1, data2, and data3 fields of
grub_gpt_partition_type_bios_boot.
* autogen.sh: Create symlinks to ${GRUB_CONTRIB} if necessary to
avoid confusing Automake. Run autogen only twice, once for the top
level and once for grub-core. Add Makefile.util.def and
Makefile.core.def from extra modules to the appropriate autogen
invocations. If Makefile.common exists in an extra module, include
it in both Makefile.util.am and grub-core/Makefile.core.am;
similarly, include any Makefile.util.common file in Makefile.util.am
and any Makefile.core.common file in grub-core/Makefile.core.am.
* conf/Makefile.common ($(top_srcdir)/grub-core/Makefile.core.am):
Depend on $(top_srcdir)/grub-core/Makefile.gcry.def.
($(top_srcdir)/grub-core/Makefile.gcry.def): Remove.
* grub-core/Makefile.am: Remove inclusion of Makefile.gcry.am.
* gentpl.py (gvar_add): Turn GVARS into a set.
(global_variable_initializers): Sort global variables on output.
(vars_init): New function.
(first_time): Likewise.
(library): Ensure that non-global variable initialisations are
emitted before the first time we emit code for a library block.
Append to variables rather than setting them. Only emit
noinst_LIBRARIES, BUILT_SOURCES, and CLEANFILES the first time for
each conditional path.
(program): installdir() emits an Autogen macro, so must be passed to
var_add rather than gvar_add.
(data): Likewise.
(script): Likewise.
(rules): New function, centralising handling for different target
types. Set up Guile association lists for first_time and vars_init,
and send most output to a diversion so that variable initialisations
can be emitted first.
(module_rules): Use new rules function.
(kernel_rules): Likewise.
(image_rules): Likewise.
(library_rules): Likewise.
(program_rules): Likewise.
(script_rules): Likewise.
(data_rules): Likewise.
* configure.ac: Add AC_PROG_LN_S, for the benefit of ntldr-img.
* .bzrignore: Add contrib and grub-core/contrib. Remove
grub-core/Makefile.gcry.am.
convert partition names to disk names if the new `convert' parameter
is set.
(grub_util_biosdisk_get_grub_dev): If opening the disk device
returns GRUB_ERR_UNKNOWN_DEVICE, treat the partition device as a
disk in its own right. This can happen with Xen disk images.
as printf format strings; the translations might contain '%' which
could cause a crash.
(main): Likewise.
* util/grub-fstest.c (argp_parser): Likewise.
* util/grub-setup.c (argp_parser): Likewise.
(main): Likewise.
on FreeBSD. Define HAVE_DIOCGDINFO on NetBSD and FreeBSD to reduce
the verbosity of later #ifs.
(find_partition_start): Define this function on FreeBSD too.
(device_is_wholedisk) [__FreeBSD__ || __FreeBSD_kernel__]: New
function.
(grub_util_biosdisk_get_grub_dev): Use partition-start-sector logic
on FreeBSD.
rules.
* grub-core/kern/emu/hostdisk.c (read_device_map): Don't
canonicalise device paths under /dev/mapper/.
(convert_system_partition_to_system_disk): Compare the
uncanonicalised path to /dev/mapper/ rather than the canonicalised
path, since device nodes under /dev/mapper/ are often symlinks.
needing to be compiled with serial support.
(ls): Indicate that multiple files are accepted.
* grub-core/commands/ls.c (GRUB_MOD_INIT): Update help text to
indicate that multiple files are accepted.
actively require those modules to be absent, so grub-fstest needs
its own initialisation and finalisation code.
* Makefile.am (grub_fstest.pp): New target.
(grub_fstest_init.lst): Likewise.
(grub_fstest_init.c): Likewise.
* Makefile.util.def (grub-fstest): Add grub_fstest_init.c.
and grub-core/disk/host.c to ...
(grub-fstest): ... here. Having the host disk implementation
present confuses grub-probe and other utility programs.
* util/grub-mkconfig.in: Only verify readability of grub.cfg.new
when writing to a file, not when writing to stdout.
starts with "(,", fill the drive containing the loaded image in
between those two characters, but expect that a full partition
specification including partition map names will follow.
required by the boot protocol.
* include/grub/i386/relocator.h (struct grub_relocator32_state): Add
ebp and edi members.
* grub-core/lib/i386/relocator.c (grub_relocator_boot): Handle
state.ebp and state.edi.
* grub-core/lib/i386/relocator32.S (grub_relocator32_start): Set
%ebp and %edi according to grub_relocator32_ebp and
grub_relocator32_edi respectively.
* grub-core/loader/i386/linux.c (grub_linux_boot): Zero state.ebp
and state.edi.
status flag options; simply omitting the option is equivalent and
simpler. Rename "wait" to "pause". Rename "sysreq" to "sysrq".
(keysym_table): Rename "num5numlock" to "numlock".
(grub_cmd_sendkey): Reinitialise `andmask' and `ormask', so that we
can uniformly say that only the last of multiple `sendkey'
invocations has any effect.
* docs/grub.texi (sendkey): New section.
and GRUB_CMDLINE_XEN_DEFAULT. Recommend setting
GRUB_GFXPAYLOAD_LINUX=text rather than unsetting it in order to
disable gfxpayload.
(Shell-like scripting): Add real content.
(Serial terminal): Suggest `terminal_input serial; terminal_output
serial' rather than putting the two commands on separate lines,
since console input will be inoperative after the first command.
(menuentry): Document --class, --users, and --hotkey options.
(terminfo): Describe what `visually-ordered UTF-8' means (thanks,
Vladimir Serbinenko).
* term/efi/console.c (grub_efi_console_init): New function.
(grub_efi_console_fini): New function.
(grub_console_term_output): Register init and fini methods.
__attribute__ ((packed)), leaving a comment.
(grub_mdraid_detect): Split out 0.9 and 1.x detection to ...
(grub_mdraid_detect_09): ... here and ...
(grub_mdraid_detect_1x): ... here.
* disk/raid.c (insert_array): Check for grub_xasprintf returning
NULL.
Colin Watson