The EFI spec mandates that the handle produced by the LoadImage boot
service has a LoadedImage protocol instance installed on it, but for
robustness, we should still deal with a NULL return value from the
helper routine that obtains this protocol pointer.
If this happens, don't try to start the image but unload it and return
an error.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Switch the x86 based EFI platform builds to the generic EFI loader,
which exposes the initrd via the LoadFile2 protocol instead of the
x86-specific setup header. This will launch the Linux kernel via its EFI
stub, which performs its own initialization in the EFI boot services
context before calling ExitBootServices() and performing the bare metal
Linux boot.
Given that only Linux kernel versions v5.8 and later support this initrd
loading method, the existing x86 loader is retained as a fallback, which
will also be used for Linux kernels built without the EFI stub. In this
case, GRUB calls ExitBootServices() before entering the Linux kernel,
and all EFI related information is provided to the kernel via struct
boot_params in the setup header, as before.
Note that this means that booting EFI stub kernels older than v5.8 is
not supported even when not using an initrd at all. Also, the EFI
handover protocol, which has no basis in the UEFI specification, is not
implemented.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The call wrappers are no longer needed now that GCC can generate
function calls using MS calling convention, so let's get rid of them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Now that GCC can generate function calls using the correct calling
convention for us, we can stop using the efi_call_XX() wrappers, and
just dereference the function pointers directly.
This avoids the untyped variadic wrapper routines, which means better
type checking for the method calls.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
UEFI mandates MS calling convention on x86_64, which was not supported
on GCC when UEFI support was first introduced into GRUB. However, now we
can use the ms_abi function type attribute to annotate functions and
function pointers as adhering to the MS calling convention, and the
compiler will generate the correct instruction sequence for us.
So let's add the appropriate annotation to all the function prototypes.
This will allow us to drop the special call wrappers in a subsequent patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_efi_pxe_t struct definition has placeholders for the various
protocol method pointers, given that they are never called in the code,
and the prototypes have been omitted, and therefore do not comply with
the UEFI spec.
So let's convert them into void* pointers, so they cannot be called
inadvertently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Now that we implemented support for the LoadFile2 protocol for initrd
loading, there is no longer a need to pass the initrd parameters via
the device tree. This means that when the LoadFile2 protocol is being
used, there is no reason to update the device tree in the first place,
and so we can ignore it entirely.
The only remaining reason to deal with the devicetree is if we are
using the "devicetree" command to load one from disk, so tweak the
logic in grub_fdt_install() to take that into account.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Recent Linux kernels will invoke the LoadFile2 protocol installed on
a well-known vendor media path to load the initrd if it is exposed by
the firmware. Using this method is preferred for two reasons:
- the Linux kernel is in charge of allocating the memory, and so it can
implement any placement policy it wants (given that these tend to
change between kernel versions),
- it is no longer necessary to modify the device tree provided by the
firmware.
So let's install this protocol when handling the "initrd" command if
such a recent kernel was detected (based on the PE/COFF image version),
and defer loading the initrd contents until the point where the kernel
invokes the LoadFile2 protocol.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When GRUB runs on top of EFI firmware, it only has access to block and
network device abstractions exposed by the firmware, and it is up to the
firmware to quiesce the underlying hardware when exiting boot services
and handing over to the OS.
This is especially important for network devices, to prevent incoming
packets from being DMA'd straight into memory after the OS has taken
over but before it has managed to reconfigure the network hardware.
GRUB handles this by means of the grub_net_fini_hw() preboot hook, which
is executed before calling into the booted image. This means that all
network devices disappear or become inoperable before the EFI stub
executes on EFI targeted builds. This is problematic as it prevents the
EFI stub from calling back into GRUB provided protocols such as
LoadFile2 for the initrd, which we will provide in a subsequent patch.
So add a flag that indicates to the network core that EFI network
devices should not be closed when grub_net_fini_hw() is called.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The way we load the Linux and PE/COFF image headers depends on a fixed
placement of the COFF header at offset 0x40 into the file. This is
a reasonable default, given that this is where Linux emits it today.
However, in order to comply with the PE/COFF spec, which allows this
header to appear anywhere in the file, let's ensure that we read the
header from where it actually appears in the file if it is not located
at offset 0x40.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Xen has its own version of the image header, to account for the
additional PE/COFF header fields. Since we are adding references to
those in the shared EFI loader code, update the common definitions
and drop the Xen specific one which no longer has a purpose.
Since in both cases, the call to grub_arch_efi_linux_check_image() is
preceded by a load of the image header, let's move the load into that
function, and rename it to grub_arch_efi_linux_load_image_header().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The PE/COFF spec permits the COFF signature and file header to appear
anywhere in the file, and the actual offset is recorded in 4 byte
little endian field at offset 0x3c of the image.
When GRUB is emitted as a PE/COFF binary, we reuse the 128 byte MS-DOS
stub (even for non-x86 architectures), putting the COFF signature and
file header at offset 0x80. However, other PE/COFF images may use
different values, and non-x86 Linux kernels use an offset of 0x40
instead.
So let's get rid of the grub_pe32_header struct from pe32.h, given that
it does not represent anything defined by the PE/COFF spec. Instead,
introduce a minimal struct grub_msdos_image_header type based on the
PE/COFF spec's description of the image header, and use the offset
recorded at file position 0x3c to discover the actual location of the PE
signature and the COFF image header.
The remaining fields are moved into a struct grub_pe_image_header,
which we will use later to access COFF header fields of arbitrary
images (and which may therefore appear at different offsets)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The "ARM\x64" magic number in the file header identifies an image as one
that implements the bare metal boot protocol, allowing the loader to
simply move the file to a suitably aligned address in memory, with
sufficient headroom for the trailing .bss segment (the required memory
size is described in the header as well).
Note of this matters for GRUB, as it only supports EFI boot. EFI does
not care about this magic number, and nor should GRUB: this prevents us
from booting other PE linux images, such as the generic EFI zboot
decompressor, which is a pure PE/COFF image, and does not implement the
bare metal boot protocol.
So drop the magic number check.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Ard Biesheuvel