This commit implements grub_tcg2_cap_pcr() for EFI by using the UEFI
TCG2 protocol, HashLogExtendEvent, to extend the specified PCR with an
EV_SEPARATOR event and ensure the event will be recorded properly in the
TPM event log.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This commit introduces the definition of grub_tcg2_cap_pcr(), a new
function designed to enhance the security of sealed keys. Its primary
purpose is to "cap" a specific PCR by extending it with an EV_SEPARATOR
event. This action cryptographically alters the PCR value, making it
impossible to unseal any key that was previously sealed to the original
PCR state. Consequently, the sealed key remains protected against
unauthorized unsealing attempts until the associated PCRs are reset to
their initial configuration, typically occurring during a subsequent
system boot.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The TPM2_PCR_Event command is introduced to tss2 to allow the user to
extend a specific PCR. The related data structure and unmarshal function
are also introduced.
However, simply invoking TPM2_PCR_Event does not automatically record
the event into the TPM event log. The TPM event log is primarily
maintained by the system firmware (e.g., BIOS/UEFI). Therefore, for most
standard use cases, the recommended method for extending PCRs and
ensuring proper event logging is to utilize the system firmware
functions.
There are specific scenarios where direct use of TPM2_PCR_Event becomes
necessary. For instance, in environments lacking system firmware support
for PCR extension, such as the grub-emu, TPM2_PCR_Event serves as the
only available method to extend PCRs.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When attempting to build grub-emu the compilation failed with the
following error message:
include/grub/dl.h: In function ‘grub_dl_is_persistent’:
include/grub/dl.h:262:1: error: no return statement in function returning non-void [-Werror=return-type]
To avoid the error make the function always return 0.
Fixes: ba8eadde6b (dl: Provide a fake grub_dl_set_persistent() and grub_dl_is_persistent() for the emu target)
Signed-off-by: Gary Lin <glin@suse.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
TPM 2.0 Key File format stores the PCR selection in the parameters
for TPM2_PolicyPCR and it already contains the selected PCR bank.
Currently, tpm2_key_protector dumped the PCR bank specified by the
--bank option, and it may not be the PCR bank for key unsealing.
To dump the real PCR bank for key unsealing, this commit records the PCR
bank used by TPM2_PolicyPCR and dumps PCR values from that bank when
necessary.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
For tpm2_key_protector and grub-protect, SHA-256 is chosen as the hash
algorithm for the TPM session. However, grub-protect mistakenly used the
hash algorithm of the PCR bank to calculate PCR digest. If the user
chose a PCR bank other than SHA-256, grub-protect created a non-SHA-256
PCR digest to seal the key. But, tpm2_key_protector expects a SHA-256
PCR digest to the TPM unsealing session, so it would fail due to digest
mismatch.
This commit fixes the hash algorithm of PCR digest in grub-protect to
avoid the potential unsealing failure.
Fixes: https://github.com/lcp/grub2/issues/4
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Sudhakar Kuppusamy <sudhakar@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add the long options of tpm2_key_protect_init along with the short options.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The TPM2 key protector tests require two external packages: swtpm-tools
and tpm2-tools. Add those two packages to the INSTALL file to inform
the user to install those packages before starting the TPM2 key protector
tests.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
This commit updates the NV index mode section and the grub-protect
section to reflect the recent changes in TPM2 key protector and
grub-protect.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Two more NV index test cases are added to test key sealing and
unsealing with the NV index handle 0x1000000.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reset "ret" to 0 when a test case fails so that the other test cases
could continue.
Also set the exit status to 1 when encountering a failure to reflect the
test result.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Since grub-protect already supports NV index mode, tpm2_seal_nv() is
replaced with one grub-protect command to simplify the test script.
"tpm2_evictcontrol" is also replaced with "grub-protect --tpm2-evict".
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This commit implements the missing NV index mode support in grub-protect.
NV index mode stores the sealed key in the TPM non-volatile memory (NVRAM)
instead of a file. There are two supported types of TPM handles.
1. Persistent handle (0x81000000~0x81FFFFFF)
Only the raw format is supported due to the limitation of persistent
handles. This grub-protect command seals the key into the
persistent handle 0x81000000.
# grub-protect \
--protector=tpm2 \
--action=add \
--tpm2-bank=sha256 \
--tpm2-pcrs=7,11 \
--tpm2-keyfile=luks-key \
--tpm2-nvindex=0x81000000
2. NV index handle (0x1000000~0x1FFFFFF)
Both TPM 2.0 Key File format and the raw format are supported by NV
index handles. Here is the grub-protect command to seal the key in
TPM 2.0 Key File format into the NV index handle 0x1000000.
# grub-protect \
--protector=tpm2 \
--action=add \
--tpm2key \
--tpm2-bank=sha256 \
--tpm2-pcrs=7,11 \
--tpm2-keyfile=luks-key \
--tpm2-nvindex=0x1000000
Besides the "add" action, the corresponding "remove" action is also
introduced. To remove the data from a persistent or NV index handle,
just use "--tpm2-nvindex=HANDLE" combining with "--tpm2-evict". This
sample command removes the data from the NV index handle 0x1000000.
# grub-protect \
--protector=tpm2 \
--action=remove \
--tpm2-evict \
--tpm2-nvindex=0x1000000
Also set and check the boolean variables with true/false instead of 1/0.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Previously, NV index mode only supported persistent handles which are
only for TPM objects.
On the other hand, the "NV index" handle allows the user-defined data,
so it can be an alternative to the key file and support TPM 2.0 Key
File format immediately.
The following tpm2-tools commands store the given key file, sealed.tpm,
in either TPM 2.0 Key File format or the raw format into the NV index
handle 0x1000000.
# tpm2_nvdefine -C o \
-a "ownerread|ownerwrite" \
-s $(stat -c %s sealed.tpm) \
0x1000000
# tpm2_nvwrite -C o -i sealed.tpm 0x1000000
To unseal the key in GRUB, add the "tpm2_key_protector_init" command to
grub.cfg:
tpm2_key_protector_init --mode=nv --nvindex=0x1000000
cryptomount -u <UUID> --protector tpm2
To remove the NV index handle:
# tpm2_nvundefine -C o 0x1000000
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Extract the logic to handle the file buffer from the SRK recover
function to prepare to load the sealed key from the NV index handle,
so the NV index mode can share the same code path in the later patch.
The SRK recover function now only reads the file and sends the file
buffer to the new function.
Besides this, to avoid introducing more options for the NV index mode,
the file format is detected automatically before unmarshaling the data,
so there is no need to use the command option to specify the file format
anymore. In other words, "-T" and "-k" are the same now.
Also update grub.text to address the change.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The following TPM 2.0 commands are introduced to tss2 to access the
TPM non-volatile memory associated with the NV index handles:
- TPM2_NV_DefineSpace,
- TPM2_NV_UndefineSpace,
- TPM2_NV_ReadPublic,
- TPM2_NV_Read,
- TPM2_NV_Write.
The related marshal/unmarshal functions are also introduced.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
grub_tpm2_readpublic() and grub_tpm2_testparms() didn't check
authCommand when marshaling the input data buffer. Currently, there is
no caller using non-NULL authCommand. However, to avoid the potential
issue, the conditional check is added to insert authCommand into the
input buffer if necessary.
Also fix a few pointer checks.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The user may need to inspect the TPM 2.0 PCR values with the GRUB shell,
so the new tpm2_dump_pcr command is added to print all PCRs of the
specified bank.
Also update the document for the new command.
Signed-off-by: Gary Lin <glin@suse.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
PCR mismatch is one common cause of TPM key unsealing fail. Since the
system may be compromised, it is not safe to boot into OS to get the PCR
values and TPM eventlog for the further investigation.
To provide some hints, GRUB now dumps PCRs on policy fail, so the user
can check the current PCR values. PCR 0~15 are chosen to cover the
firmware, bootloader, and OS.
The sample output:
PCR Mismatch! Check firmware and bootloader before typing passphrase!
TPM PCR [sha256]:
00: 17401f37710984c1d8a03a81fff3ab567ae9291bac61e21715b890ee28879738
01: 7a114329ba388445a96e8db2a072785937c1b7a8803ed7cc682b87f3ff3dd7a8
02: 11c2776849e8e24b7d80c926cbc4257871bffa744dadfefd3ed049ce25143e05
03: 6c33b362073e28e30b47302bbdd3e6f9cee4debca3a304e646f8c68245724350
04: 62d38838483ecfd2484ee3a2e5450d8ca3b35fc72cda6a8c620f9f43521c37d1
05: d8a85cb37221ab7d1f2cc5f554dbe0463acb6784b5b8dc3164ccaa66d8fff0e1
06: 9262e37cbe71ed4daf815b4a4881fb7251c9d371092dde827557d5368121e10e
07: 219d542233be492d62b079ffe46cf13396a8c27e520e88b08eaf2e6d3b7e70f5
08: de1f61c973b673e505adebe0d7e8fb65fde6c24dd4ab4fbaff9e28b18df6ecd3
09: c1de7274fa3e879a16d7e6e7629e3463d95f68adcfd17c477183846dccc41c89
10: 0000000000000000000000000000000000000000000000000000000000000000
11: 0000000000000000000000000000000000000000000000000000000000000000
12: 0000000000000000000000000000000000000000000000000000000000000000
13: 0000000000000000000000000000000000000000000000000000000000000000
14: 9ab9ebe4879a7f4dd00c04f37e79cfd69d0dd7a8bcc6b01135525b67676a3e40
15: 0000000000000000000000000000000000000000000000000000000000000000
16: 0000000000000000000000000000000000000000000000000000000000000000
17: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
18: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
19: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
20: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
21: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
22: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
23: 0000000000000000000000000000000000000000000000000000000000000000
error: failed to unseal sealed key (TPM2_Unseal: 0x99d).
error: no key protector provided a usable key for luks (af16e48f-746b-4a12-aae1-c14dcee429e0).
If the user happens to have the PCR values for key sealing, the PCR dump
can be used to identify the changed PCRs and narrow down the scope for
closer inspection.
Please note that the PCR dump is trustworthy only if the GRUB binary is
authentic, so the user has to check the GRUB binary thoroughly before
using the PCR dump.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Update the user manual to address TPM2 key protector including the two
related commands, tpm2_key_protector_init and tpm2_key_protector_clear,
and the user-space utility: grub-protect.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
For the tpm2_key_protector module, the TCG2 command submission function
is the only difference between a QEMU instance and grub-emu. To test
TPM2 key unsealing with a QEMU instance, it requires an extra OS image
to invoke grub-protect to seal the LUKS key, rather than a simple
grub-shell rescue CD image. On the other hand, grub-emu can share the
emulated TPM2 device with the host, so that we can seal the LUKS key on
host and test key unsealing with grub-emu.
This test script firstly creates a simple LUKS image to be loaded as a
loopback device in grub-emu. Then an emulated TPM2 device is created by
"swtpm chardev" and PCR 0 and 1 are extended.
There are several test cases in the script to test various settings. Each
test case uses grub-protect or tpm2-tools to seal the LUKS password
with PCR 0 and PCR 1. Then grub-emu is launched to load the LUKS image,
try to mount the image with tpm2_key_protector_init and cryptomount, and
verify the result.
Based on the idea from Michael Chang.
Cc: Michael Chang <mchang@suse.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Cc: Glenn Washburn <development@efficientek.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
As a preparation to test tpm2_key_protector with grub-emu, the new
option, --tpm-device, is introduced to specify the TPM device for
grub-emu so that grub-emu can access an emulated TPM device from
the host.
Since grub-emu can directly access the device on host, it's easy to
implement the essential TCG2 command submission function with the
read/write functions and enable tpm2_key_protector module for grub-emu,
so that we can further test TPM2 key unsealing with grub-emu.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
When using disk auto-unlocking with TPM 2.0, the typical grub.cfg may
look like this:
tpm2_key_protector_init --tpm2key=(hd0,gpt1)/boot/grub/sealed.tpm
cryptomount -u <PART-UUID> -P tpm2
search --fs-uuid --set=root <FS-UUID>
Since the disk search order is based on the order of module loading, the
attacker could insert a malicious disk with the same FS-UUID root to
trick GRUB to boot into the malicious root and further dump memory to
steal the unsealed key.
Do defend against such an attack, we can specify the hint provided by
"grub-probe" to search the encrypted partition first:
search --fs-uuid --set=root --hint='cryptouuid/<PART-UUID>' <FS-UUID>
However, for LVM on an encrypted partition, the search hint provided by
"grub-probe" is:
--hint='lvmid/<VG-UUID>/<LV-UUID>'
It doesn't guarantee to look up the logical volume from the encrypted
partition, so the attacker may have the chance to fool GRUB to boot
into the malicious disk.
To minimize the attack surface, this commit tweaks the disk device search
in diskfilter to look up cryptodisk devices first and then others, so
that the auto-unlocked disk will be found first, not the attacker's disk.
Cc: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
An attacker may insert a malicious disk with the same crypto UUID and
trick GRUB to mount the fake root. Even though the key from the key
protector fails to unlock the fake root, it's not wiped out cleanly so
the attacker could dump the memory to retrieve the secret key. To defend
such attack, wipe out the cached key when we don't need it.
Cc: Fabian Vogt <fvogt@suse.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
This commit handles the TPM2_PolicyAuthorize command from the key file
in TPM 2.0 Key File format.
TPM2_PolicyAuthorize is the essential command to support authorized
policy which allows the users to sign TPM policies with their own keys.
Per TPM 2.0 Key File [1], CommandPolicy for TPM2_PolicyAuthorize
comprises "TPM2B_PUBLIC pubkey", "TPM2B_DIGEST policy_ref", and
"TPMT_SIGNATURE signature". To verify the signature, the current policy
digest is hashed with the hash algorithm written in "signature", and then
"signature" is verified with the hashed policy digest and "pubkey". Once
TPM accepts "signature", TPM2_PolicyAuthorize is invoked to authorize the
signed policy.
To create the key file with authorized policy, here are the pcr-oracle [2]
commands:
# Generate the RSA key and create the authorized policy file
$ pcr-oracle \
--rsa-generate-key \
--private-key policy-key.pem \
--auth authorized.policy \
create-authorized-policy 0,2,4,7,9
# Seal the secret with the authorized policy
$ pcr-oracle \
--key-format tpm2.0 \
--auth authorized.policy \
--input disk-secret.txt \
--output sealed.key \
seal-secret
# Sign the predicted PCR policy
$ pcr-oracle \
--key-format tpm2.0 \
--private-key policy-key.pem \
--from eventlog \
--stop-event "grub-file=grub.cfg" \
--after \
--input sealed.key \
--output /boot/efi/efi/grub/sealed.tpm \
sign 0,2,4,7,9
Then specify the key file and the key protector to grub.cfg in the EFI
system partition:
tpm2_key_protector_init -a RSA --tpm2key=(hd0,gpt1)/efi/grub/sealed.tpm
cryptomount -u <PART_UUID> -P tpm2
For any change in the boot components, just run the "sign" command again
to update the signature in sealed.tpm, and TPM can unseal the key file
with the updated PCR policy.
[1] https://www.hansenpartnership.com/draft-bottomley-tpm2-keys.html
[2] https://github.com/okirch/pcr-oracle
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
A Trusted Platform Module (TPM) Software Stack (TSS) provides logic to
compose and submit TPM commands and parse responses.
A limited number of TPM commands may be accessed via the EFI TCG2
protocol. This protocol exposes functionality that is primarily geared
toward TPM usage within the context of Secure Boot. For all other TPM
commands, however, such as sealing and unsealing, this protocol does not
provide any help, with the exception of passthrough command submission.
The SubmitCommand method allows a caller to send raw commands to the
system's TPM and to receive the corresponding response. These
command/response pairs are formatted using the TPM wire protocol. To
construct commands in this way, and to parse the TPM's response, it is
necessary to, first, possess knowledge of the various TPM structures, and,
second, of the TPM wire protocol itself.
As such, this patch includes implementations of various grub_tpm2_* functions
(inventoried below), and logic to write and read command and response
buffers, respectively, using the TPM wire protocol.
Functions:
- grub_tpm2_create(),
- grub_tpm2_createprimary(),
- grub_tpm2_evictcontrol(),
- grub_tpm2_flushcontext(),
- grub_tpm2_load(),
- grub_tpm2_pcr_read(),
- grub_tpm2_policygetdigest(),
- grub_tpm2_policypcr(),
- grub_tpm2_readpublic(),
- grub_tpm2_startauthsession(),
- grub_tpm2_unseal(),
- grub_tpm2_loadexternal(),
- grub_tpm2_hash(),
- grub_tpm2_verifysignature(),
- grub_tpm2_policyauthorize(),
- grub_tpm2_testparms().
Signed-off-by: Hernan Gatta <hegatta@linux.microsoft.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
This commit adds the necessary TPM2 types and structs as the preparation
for the TPM2 Software Stack (TSS2) support. The Marshal/Unmarshal
functions are also added to handle the data structure to be submitted to
TPM2 commands and to be received from the response.
Signed-off-by: Hernan Gatta <hegatta@linux.microsoft.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
As the preparation to support TPM2 Software Stack (TSS2), this commit
implements the TPM2 buffer handling functions to pack data for the TPM2
commands and unpack the data from the response.
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Hernan Gatta <hegatta@linux.microsoft.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Document libtasn1 in docs/grub-dev.texi and add the upgrade steps.
Also add the patches to make libtasn1 compatible with GRUB code.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
There is a testcase to test the values larger than "int" but smaller
than "long". However, for some architectures, "long" and "int" are the
same and the compiler may issue a warning like this:
grub-core/tests/asn1/tests/Test_overflow.c:48:50: error: left shift of negative value [-Werror=shift-negative-value]
unsigned long num = ((long) GRUB_UINT_MAX) << 2;
^~
To avoid unnecessary error the testcase is enabled only when
GRUB_LONG_MAX is larger than GRUB_INT_MAX.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
This commit replaces printf() and fprintf() with grub_printf() to print
the error messages for the testcases. Besides, asn1_strerror() is used
to convert the result code to strings instead of asn1_perror().
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Some testcases use exit() to end the test. Since all the asn1 testcases
are invoked as functions, this commit replaces exit() with return to
reflect the test results, so that the main test function can check the
results.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
This commit changes the main functions in the testcases to the test
names so that the real "main" test function can invokes them.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
This commit removes all the headers and only uses asn1_test.h.
To avoid including int.h from grub-core/lib/libtasn1-grub/lib,
CONST_DOWN is defined in reproducers.c.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
In _asn1_tag_der(), the first while loop for the long form may end up
with a "k" value with "ASN1_MAX_TAG_SIZE" and cause the buffer overrun
in the second while loop. This commit tweaks the conditional check to
avoid producing a too large "k".
This is a quick fix and may differ from the official upstream fix.
libtasn1 issue: https://gitlab.com/gnutls/libtasn1/-/issues/49
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Replace a 64-bit division with a call to grub_divmod64(), preventing
creation of __udivdi3() calls on 32-bit platforms.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Since libtasn1.h is the header to be included by users, including the
standard POSIX headers in libtasn1.h would force the user to add the
CFLAGS/CPPFLAGS for the POSIX headers.
This commit adjusts the header paths to use the grub headers instead of
the standard POSIX headers, so that users only need to include
libtasn1.h to use libtasn1 functions.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
strcat() is not available in GRUB. This commit replaces strcat() and
_asn1_strcat() with the bounds-checking _asn1_str_cat().
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
strcat() is not available in GRUB. This commit replaces strcat() with
strcpy() in _asn1_str_cat() as the preparation to replace other strcat()
with the bounds-checking _asn1_str_cat().
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
We don't expect to be able to write ASN.1, only read it,
so we can disable some code.
Do that with #if 0/#endif, rather than deletion. This means
that the difference between upstream and GRUB is smaller,
which should make updating libtasn1 easier in the future.
With these exclusions we also avoid the need for minmax.h,
which is convenient because it means we don't have to
import it from gnulib.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
_split_longopt() was the bash-completion private API and removed since
bash-completion 2.12. This commit initializes the bash-completion
general variables with _init_completion() to avoid the potential
"command not found" error.
Although bash-completion 2.12 introduces _comp_initialize() to deprecate
_init_completion(), _init_completion() is still chosen for the better
backward compatibility.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are two system directories for bash-completion scripts. One is
/usr/share/bash-completion/completions/ and the other is
/etc/bash_completion.d/. The "etc" scripts are loaded in advance and
for backward compatibility while the "usr" scripts are loaded on demand.
To load scripts on demand it requires a corresponding script for every
command. So, the main bash-completion script is split into several
subscripts for different "grub-*" commands. To share the code the real
completion functions are still implemented in "grub" and each
subscript sources "grub" and invokes the corresponding function.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When adding/changing the password for the luks2 partition, cryptsetup
may reject the command due to the weak password. Since this is only for
testing, add "--force-password" to switch password quality check off to
avoid the unexpected failure.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Per "man 5 cpio", the namesize in the cpio header includes the trailing
NUL byte of the pathname and the pathname is followed by NUL bytes, but
the current implementation ignores the trailing NUL byte when making
the newc header. Although make_header() tries to pad the pathname string,
the padding won't happen when strlen(name) + sizeof(struct newc_head)
is a multiple of 4, and the non-NULL-terminated pathname may lead to
unexpected results.
Assume that a file is created with 'echo -n aaaa > /boot/test12' and
loaded by grub2:
linux /boot/vmlinuz
initrd newc:test12:/boot/test12 /boot/initrd
The initrd command eventually invoked grub_initrd_load() and sent
't''e''s''t''1''2' to make_header() to generate the header:
00000070 30 37 30 37 30 31 33 30 31 43 41 30 44 45 30 30 |070701301CA0DE00|
00000080 30 30 38 31 41 34 30 30 30 30 30 33 45 38 30 30 |0081A4000003E800|
00000090 30 30 30 30 36 34 30 30 30 30 30 30 30 31 36 33 |0000640000000163|
000000a0 37 36 45 34 35 32 30 30 30 30 30 30 30 34 30 30 |76E4520000000400|
000000b0 30 30 30 30 30 38 30 30 30 30 30 30 31 33 30 30 |0000080000001300|
000000c0 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000|
000000d0 30 30 30 30 30 36 30 30 30 30 30 30 30 30 74 65 |00000600000000te|
^namesize
000000e0 73 74 31 32 61 61 61 61 30 37 30 37 30 31 30 30 |st12aaaa07070100|
^^ end of the pathname
Since strlen("test12") + sizeof(struct newc_head) is 116 = 29 * 4,
make_header() didn't pad the pathname, and the file content followed
"test12" immediately. This violates the cpio format and may trigger such
error during linux boot:
Initramfs unpacking failed: ZSTD-compressed data is trunc
To avoid the potential problems, this commit counts the trailing NUL byte
in when calling make_header() and adjusts the initrd size accordingly.
Now the header becomes
00000070 30 37 30 37 30 31 33 30 31 43 41 30 44 45 30 30 |070701301CA0DE00|
00000080 30 30 38 31 41 34 30 30 30 30 30 33 45 38 30 30 |0081A4000003E800|
00000090 30 30 30 30 36 34 30 30 30 30 30 30 30 31 36 33 |0000640000000163|
000000a0 37 36 45 34 35 32 30 30 30 30 30 30 30 34 30 30 |76E4520000000400|
000000b0 30 30 30 30 30 38 30 30 30 30 30 30 31 33 30 30 |0000080000001300|
000000c0 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000|
000000d0 30 30 30 30 30 37 30 30 30 30 30 30 30 30 74 65 |00000700000000te|
^namesize
000000e0 73 74 31 32 00 00 00 00 61 61 61 61 30 37 30 37 |st12....aaaa0707|
^^ end of the pathname
Besides the trailing NUL byte, make_header() pads 3 more NUL bytes, and
the user can safely read the pathname without a further check.
To conform to the cpio format, the headers for "TRAILER!!!" are also
adjusted to include the trailing NUL byte, not ignore it.
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Gary Lin