The access_size is part of a union, so doesn't technically exist for
a PIO port (i.e., not MMIO), but we set it anyways.
This doesn't cause a bug today because the other leg of the union
doesn't have anything overlapping with it now, but it's bad, I will
punish myself for writing it that way :-) In the meantime, fix this
and actually name the struct inside the union for clarity of intent
and to avoid such issue in the future.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit f23bc6510 (Transform -C option to grub-mkstandalone to
--core-compress available in all grub-install flavours.) declared
a new long option for specifying the compression method to use for
the core image.
However, the option key has not been replaced in the parser function,
it still expects the old one formerly used by grub-mkstandalone.
Because of this the option is not recognized by any of the utils for
which it is listed as supported.
Signed-off-by: Ákos Nagy <nagyakos@outlook.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When an invalid node size is detected in grub_hfsplus_mount(), data
pointer is freed. Thus, file->data is not set. The code should also
set the grub_errno when that happens to indicate an error and to avoid
accessing the uninitialized file->data in grub_file_close().
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The exfat-utils package is an older package complementing exfat-fuse, and
was the only exfat tools for a long time. The exfat filesystem testing code
was written with these tools in mind. A newer project exfatprogs appears to
be of better quality and functionality and was written to complement the
somewhat new exfat kernel module. Ideally we should be using the newer
exfatprogs. However, the command line interface for mkfs.exfat is different
between the two. So we can't use the exfatprogs tools until the test scripts
have been updated to account for this. Recommend installing exfat-utils
instead of exfatprogs for now.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When trying to resolve DNS names into IP addresses, the DNS code fails
from time to time with the following error:
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
error: ../../grub-core/net/dns.c:688:no DNS record found.
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
This happens when both IPv4 and IPv6 queries are performed against the
DNS server (e.g. 8.8.8.8) but there is no IP returned for IPv6 query, as
shown below:
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
grub> net_del_dns 192.168.122.1
grub> net_add_dns 8.8.8.8
grub> net_nslookup ipv4.test-ipv6.com
error: ../../grub-core/net/dns.c:688:no DNS record found.
grub> net_nslookup ipv4.test-ipv6.com
216.218.228.115
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
The root cause is the code exiting prematurely when the data->addresses
buffer has been allocated in recv_hook(), even if there was no address
returned last time recv_hook() executed.
Signed-off-by: Renaud Métrich <rmetrich@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When deleting the DNS server, we get the following error message:
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
grub> net_del_dns 192.168.122.1
error: ../../grub-core/net/dns.c:646:no DNS reply received.
-------- 8< ---------------- 8< ---------------- 8< ---------------- 8< --------
This happens because the implementation is broken, it does a "add"
internally instead of a "delete".
Signed-off-by: Renaud Métrich <rmetrich@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
I ran the test suite on a 3A5000 desktop, a LoongArch architecture machine,
using Archlinux for LoongArch distro, see https://github.com/loongarchlinux.
Some software versions are:
* linux 6.3.0-rc4
* gcc 13.0.1 20230312
* binutils 2.40
* qemu 7.2.0
The test results of running "make check" with qemu 7.2 are as follows:
=================================
GRUB 2.11: ./test-suite.log
=================================
# TOTAL: 85
# PASS: 73
# SKIP: 8
# XFAIL: 0
# FAIL: 2
# XPASS: 0
# ERROR: 2
.. contents:: :depth: 2
ERROR: f2fs_test
================
mount: /tmp/grub-fs-tester.20230418175640563815408.f2fs.UDs/f2fs_rw: unknown filesystem type 'f2fs'.
dmesg(1) may have more information after failed mount system call.
MOUNT FAILED.
ERROR f2fs_test (exit status: 99)
FAIL: hfs_test
==============
recode: Request `utf8..macroman' is erroneous
mkfs.hfs: name required with -v option
FAIL hfs_test (exit status: 1)
ERROR: zfs_test
===============
zpool not installed; cannot test zfs.
ERROR zfs_test (exit status: 99)
SKIP: pata_test
===============
SKIP pata_test (exit status: 77)
SKIP: ahci_test
===============
SKIP ahci_test (exit status: 77)
SKIP: uhci_test
===============
SKIP uhci_test (exit status: 77)
SKIP: ohci_test
===============
SKIP ohci_test (exit status: 77)
SKIP: ehci_test
===============
SKIP ehci_test (exit status: 77)
SKIP: fddboot_test
==================
SKIP fddboot_test (exit status: 77)
SKIP: netboot_test
==================
SKIP netboot_test (exit status: 77)
SKIP: pseries_test
==================
SKIP pseries_test (exit status: 77)
FAIL: grub_func_test
====================
WARNING: Image format was not specified for '/tmp/grub-shell.HeTAD8Ty3U/grub.iso' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
Functional test failure: shift_test:
...
gfxterm_menu_640x480xi16:3 failed: 0xce34981e vs 0xd9f04953
tests/video_checksum.c:checksum:615: assert failed: 0 Checksum
gfxterm_menu_640x480xi16:2 failed: 0xa8fb749d vs 0xbf3fa5d0
tests/video_checksum.c:checksum:615: assert failed: 0 Checksum
gfxterm_menu_640x480xi16:1 failed: 0xce34981e vs 0xd9f04953
gfxterm_menu: FAIL
...
videotest_checksum:
videotest_checksum: PASS
exfctest:
exfctest: PASS
TEST FAILURE
FAIL grub_func_test (exit status: 1)
We got 2 errors:
* f2fs_test
The kernel uses 16k pages, causing failures when loading the f2fs kernel module,
see https://github.com/torvalds/linux/blob/master/fs/f2fs/super.c#L4670
This error can be ignored.
* zfs_test
zfs does not support the LoongArch architecture and is not compatible with the
6.3 kernel.
This error can be ignored.
We got 2 failures:
* hfs_test
I use recode 3.7.14-1 on Archlinux, running `recode -l` gives no output `MacRoman`,
so we get this error.
On Linux systems that support LoongArch, there is currently no need to use HFS,
so this failure can be ignored.
* grub_func_test
I don't know the reason for this failure. I guess it may be related to qemu's edk2.
In the previous review, I was told that the failure here is the expected behavior.
So, we can ignore this failure.
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds LoongArch to the GRUB build system and various tools,
so GRUB can be built on LoongArch as a UEFI application.
Signed-off-by: Zhou Yang <zhouyang@loongson.cn>
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch adds support of the stack-based LoongArch relocations
throughout GRUB, including tools, dynamic linkage, and support for
conversion of ELF relocations into PE ones. A stack machine is required
to handle these per the spec [1] (see the R_LARCH_SOP types), of which
a simple implementation is included.
These relocations are produced by binutils 2.38 and 2.39, while the newer
v2.00 relocs require more recent toolchain (binutils 2.40+ & gcc 13+, or
LLVM 16+). GCC 13 has not been officially released as of early 2023, so
support for v1.00 relocs are expected to stay relevant for a while.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html#_relocations
Signed-off-by: Zhou Yang <zhouyang@loongson.cn>
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On entry, we need to save the system table pointer as well as our image
handle. Add an early startup file that saves them and then brings us
into our main function.
Signed-off-by: Zhou Yang <zhouyang@loongson.cn>
Signed-off-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
GRUB since 93a786a00 (kern/efi/sb: Enforce verification of font files)
has enforced verification of font files in secure boot mode. In order to
continue to be able to load some default fonts, vendors may bundle them
with their signed EFI image by adding them to the built-in memdisk.
This change makes the font loader try loading fonts from the memdisk
before the prefix path when attempting to load a font file by specifying
its filename, which avoids having to make changes to GRUB configurations
in order to accommodate memdisk bundled fonts. It expects the directory
structure to be the same as fonts stored in the prefix path,
i.e. /fonts/<name>.pf2.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Steve McIntyre <93sam@debian.org>
Tested-by: Steve McIntyre <93sam@debian.org>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Allow specifying port numbers for http and tftp paths and allow IPv6
addresses to be recognized with brackets around them, which is required
to specify a port number.
Co-authored-by: Aaron Miller <aaronmiller@fb.com>
Signed-off-by: Aaron Miller <aaronmiller@fb.com>
Co-authored-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The notation introduced in ac8a37dda (net/http: Allow use of non-standard
TCP/IP ports) contradicts that used in downstream distributions including
Fedora, RHEL, Debian, Ubuntu, and others. Revert it and apply the downstream
notation which was originally proposed to the GRUB in 2016.
This reverts commit ac8a37dda (net/http: Allow use of non-standard TCP/IP ports).
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In filesystem timestamp test, a check is done to verify that the timestamp
for a file as reported in Linux by the filesystem is within a few seconds
of the timestamp as reported by GRUB. This is done by grepping the output
of GRUB's ls command for the timestamp as reported by the filesystem in
Linux and for each of 3 seconds past that timestamp. All of these checks
except one redirect the output of grep to /dev/null. Fix this exception
to behave as the other checks.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The transform_sector() function is not very clear in what it's doing
and confusing. The GRUB already has a function which is doing the same
thing in a very self explanatory way, i.e., grub_disk_to_native_sector().
So, it's much better to use self explanatory one than transform_sector().
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.vnet.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The ISO filesystem image iso9660_early_ce.iso exposes the unusual
situation that the Rock Ridge name entry of its only file is located
after a CE entry which points to the next continuation area.
The correct behavior is to read the Rock Ridge name and to only then
load the next continuation area. If GRUB performs this correctly, then
the name "RockRidgeName:x" will be read and reported by grub-fstest.
If GRUB wrongly performs the CE hop immediately when encountering the CE
entry, then the dull ISO 9660 name "rockridg" will not be overridden and
be put out by grub-fstest.
Signed-off-by: Thomas Schmitt <scdbackup@gmx.net>
Tested-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The SUSP specs demand that the reading of the next SUSP area which is
depicted by a CE entry shall be delayed until reading of the current
SUSP area is completed. Up to now GRUB immediately ends reading of the
current area and loads the new one. So, buffer the parameters of a found
CE entry and perform checks and reading of new data only after the
reader loop has ended.
Signed-off-by: Thomas Schmitt <scdbackup@gmx.net>
Tested-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch enables multiple options in Vec5 which are required and
solves the boot issues seen on some machines which are looking for
these specific options.
1. LPAR: Client program supports logical partitioning and
associated hcall()s.
2. SPLPAR: Client program supports the Shared
Processor LPAR Option.
3. DYN_RCON_MEM: Client program supports the
“ibm,dynamic-reconfiguration-memory” property and it may be
presented in the device tree.
4. LARGE_PAGES: Client supports pages larger than 4 KB.
5. DONATE_DCPU_CLS: Client supports donating dedicated processor cycles.
6. PCI_EXP: Client supports PCI Express implementations
utilizing Message Signaled Interrupts (MSIs).
7. CMOC: Enables the Cooperative Memory Over-commitment Option.
8. EXT_CMO: Enables the Extended Cooperative Memory Over-commit Option.
9. ASSOC_REF: Enables “ibm,associativity” and
“ibm,associativity-reference-points” properties.
10. AFFINITY: Enables Platform Resource Reassignment Notification.
11. NUMA: Supports NUMA Distance Lookup Table Option.
12. HOTPLUG_INTRPT: Supports Hotplug Interrupts.
13. HPT_RESIZE: Enable Hash Page Table Resize Option.
14. MAX_CPU: Defines maximum number of CPUs supported.
15. PFO_HWRNG: Supports Random Number Generator.
16. PFO_HW_COMP: Supports Compression Engine.
17. PFO_ENCRYPT: Supports Encryption Engine.
18. SUB_PROCESSORS: Supports Sub-Processors.
19. DY_MEM_V2: Client program supports the “ibm,dynamic-memory-v2” property in the
“ibm,dynamic-reconfiguration-memory” node and it may be presented in the device tree.
20. DRC_INFO: Client program supports the “ibm,drc-info” property definition and it may be
presented in the device tree.
Signed-off-by: Avnish Chouhan <avnish@linux.vnet.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch converts the plain numbers used in Vec5 properties to constants.
1. LPAR: Client program supports logical partitioning and
associated hcall()s.
2. SPLPAR: Client program supports the Shared
Processor LPAR Option.
3. CMO: Enables the Cooperative Memory Over-commitment Option.
4. MAX_CPU: Defines maximum number of CPUs supported.
Signed-off-by: Avnish Chouhan <avnish@linux.vnet.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Per systemctl(1), it "is asynchronous; it will return after the reboot
operation is enqueued, without waiting for it to complete". This differs
from kexec(8), which calls reboot(2) and therefore does not return.
When not using fallback, this confusingly results in:
error trying to perform 'systemctl kexec': 0
Aborted. Press any key to exit.
on screen for a bit, followed by successful kexec.
To reduce the likelihood of hitting this case, add a delay on successful
return. Ultimately, the systemd interface is racy: we can't avoid it
entirely unless we never fallback on success.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When the tpm module is loaded, the verifier reads entire file into
memory, measures it and uses verified content as a backing buffer for
file accesses. However, this process may result in high memory
utilization for file operations, sometimes causing a system to run out
of memory which may finally lead to boot failure. To address this issue,
among others, the commit 887f98f0d (mm: Allow dynamically requesting
additional memory regions) have optimized memory management by
dynamically allocating heap space to maximize memory usage and reduce
threat of memory exhaustion. But in some cases problems may still arise,
e.g., when large ISO images are mounted using loopback or when dealing
with embedded systems with limited memory resources.
Unfortunately current implementation of the tpm module doesn't allow
elimination of the back buffer once it is loaded. Even if the TPM device
is not present or it has been explicitly disabled. This may unnecessary
allocate a lot memory. To solve this issue, a patch has been developed
to detect the TPM status at module load and skip verifier registration
if the device is missing or deactivated. This prevents allocation of
memory for the back buffer, avoiding wasting memory when no real measure
boot functionality is performed. Disabling the TPM device in the system
can reduce memory usage in the GRUB. It is useful in scenarios where
high memory utilization is a concern and measurements of loaded
artifacts are not necessary.
Signed-off-by: Michael Chang <mchang@suse.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Now that the gdb_grub script uses the Python API in GDB, a GDB with Python
support must be used. Note that this means a GDB with version greater than
7.0 must be used. This should not be an issue since that was released over
a decade ago. Also, the minimum version of Python must be 3.5, which was
released around 8 years ago.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
RISC-V doesn't have to do anything very different from other architectures
to loader EFI stub linux kernel. As a result, just use the common linux
loader instead of defining a RISC-V specific linux loader.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The arch specific image header details are not very useful as most of
the GRUB just looks at the PE/COFF spec parameters (PE32 magic and
header offset).
Remove the arch specific images headers and define a generic arch
headers that provide enough PE/COFF fields for the GRUB to parse
kernel images correctly.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
ARM64 linux loader code is written in such a way that it can be reused
across different architectures without much change. Move it to common
code so that RISC-V doesn't have to define a separate loader.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-module-verifierXX.c, the function grub_module_verifyXX() performs an
initial check that the ELF section headers are within the module's size, but
doesn't check if the sections being accessed have contents that are within the
module's size. In particular, we need to check that sh_offset and sh_size are
less than the module's size. However, for some section header types we don't
need to make these checks. For the type SHT_NULL, the section header is marked
as inactive and the rest of the members within the section header have undefined
values, so we don't need to check for sh_offset or sh_size. In the case of the
type SHT_NOBITS, sh_offset has a conceptual offset which may be beyond the
module size. Also, this type's sh_size may have a non-zero size, but a section
of this type will take up no space in the module. This can all be checked in the
function get_shdr(), but in order to do so, the parameter module_size must be
added to functions so that the value of the module size can be used in
get_shdr() from grub_module_verifyXX().
Also, had to rework some for loops to ensure the index passed to get_shdr() is
within bounds.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add symbols for boot.image, disk.image, and lzma_decompress.image if the
target is i386-pc. This is only done for i386-pc because that is the only
target that uses the images. By loading the symbols for these images,
these images can be more easily debugged by allowing the setting of break-
points in that code and to see easily get the value of data symbols.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A new command, run_on_start, for things to do before GRUB starts executing.
Currently, this is setting up the loading of module symbols as they are
loaded and allowing user-defined script to be run if a command named
"onstart" exists.
On some platforms, notably x86, software breakpoints set in GDB before
the GRUB image is loaded will be cleared when the image is loaded. This
is because the breakpoints work by overwriting the memory of the break-
point location with a special instruction which when hit will cause the
debugger to stop execution. Just before execution is resumed by the
debugger, the original instruction bytes are put back. When a breakpoint
is set before the GRUB image is loaded, the special debugger instruction
will be written to memory and when the GRUB image is loaded by the
firmware, which has no knowledge of the debugger, the debugger instruction
is overwritten. To the GDB user, GDB will show the breakpoint as set, but
it will never be hit. Furthermore, GDB now becomes confused, such that
even deleting and re-setting the breakpoint after the GRUB image is loaded
will not allow for a working breakpoint.
To work around this, in run_on_start, first a watchpoint is set on _start,
which will be triggered when the firmware starts loading the GRUB image.
When the _start watchpoint is hit, the current breakpoints are saved to a
file and then deleted by GDB before they can be overwritten by the firmware
and confuse GDB. Then a temporary software breakpoint is set on _start,
which will get triggered when the firmware hands off to GRUB to execute. In
that breakpoint load the previously saved and deleted breakpoints now that
there is no worry of them getting overwritten by the firmware. This is
needed for runtime_load_module to work when it is run before the GRUB image
is loaded.
Note that watchpoints are generally types of hardware breakpoints on x86, so
its deleted as soon as it gets triggered so that a minimal set of hardware
breakpoints are used, allowing more for the user.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Many targets, such as EFI, load GRUB at addresses that are determined at
runtime. So the load addresses in kernel.exec will almost certainly be
wrong. Given the address of the start of the text segment, these
functions will tell GDB to load the symbols at the proper locations. It
is left up to the user to determine how to get the text address of the
loaded GRUB image.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Remove gmodule.pl and rewrite as a python in gdb_helper.py. This removes
Perl dependency for the GRUB GDB script, but adds Python as a dependency.
This is more desirable because Python is tightly integrated with GDB and
can do things not even available to GDB native scripting language. GDB must
be built with Python, however this is not a major limitation because every
major distro non-end-of-life versions build GDB with Python support. And GDB
has had support for Python since around 7.1-ish, which is about a decade.
This re-implementation has an added feature. If there is a user defined
command named "onload_<module name>", then that command will be executed
after the symbols for the specified module are loaded. When debugging a
module it can be desirable to set break points on code in the module.
This is difficult in GRUB because, at GDB start, the module is not loaded
and on EFI platforms its not known ahead of time where the module will
be loaded. So allow users to create an "onload_<modname>" command which
will be run when the module with name "modname" is loaded.
Another addition is a new convenience function is defined
$is_user_command(), which returns true if its string argument is
the name of a user-defined command.
A secondary benefit of these changes is that the script does not write
temporary files and has better error handling capabilities.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The gdb_grub script was originally meant to be run once when GDB first
starts up via the -x argument. So it runs commands unconditionally
assuming that the script has not been run before. Its nice to be able
to source the script again when developing the script to modify/add
commands. So only run the commands not defined in user-defined commands,
if a variable $runonce has already been set and when those commands have
been run to set $runonce.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are broadly two classes of targets to consider when loading symbols
for GRUB, targets that determine where to load GRUB at runtime
(dynamically positioned) and those that do not (statically positioned).
For statically positioned targets, symbol loading is determined at link
time, so nothing more needs to be known to load the symbols. For
dynamically positioned targets, such as EFI targets, at runtime symbols
should be offset by an amount that depends on where the runtime chose to
load GRUB.
It is important to not load symbols statically for dynamic targets
because then when subsequently loading the symbols correctly one must
take care to remove the existing static symbols, otherwise there will be
two sets of symbols and GDB seems to prefer the ones loaded first (i.e.
the static ones).
Use autoconf variables to generate a gdb_grub for a particular target,
which conditionally run startup code depending on if the target uses
static or dynamic loading.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
By moving this code into a function, it can be run re-utilized while gdb is
running, not just when loading the script. This will also be useful in
some following changes which will make a separate script path for targets
which statically vs dynamically position GRUB code.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The gcc build has failed for 32-bit host (e.g. i386-emu and arm-emu)
due to mismatch between format specifier and data type.
../grub-core/osdep/devmapper/getroot.c: In function
'grub_util_pull_devmapper':
../grub-core/osdep/devmapper/getroot.c:265:75: error: format '%lu'
expects argument of type 'long unsigned int', but argument 2 has type
'int' [-Werror=format=]
../grub-core/osdep/devmapper/getroot.c:276:80: error: format '%lu'
expects argument of type 'long unsigned int', but argument 2 has type
'int' [-Werror=format=]
This patch fixes the problem by casting the type of calculated offset to
grub_size_t and use platform PRIuGRUB_SIZE as format specifier.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add support for trusted boot using a vTPM 2.0 on the IBM IEEE1275
PowerPC platform. With this patch grub now measures text and binary data
into the TPM's PCRs 8 and 9 in the same way as the x86_64 platform
does.
This patch requires Daniel Axtens's patches for claiming more memory.
Note: The tpm_init() function cannot be called from GRUB_MOD_INIT() since
it does not find the device nodes upon module initialization and
therefore the call to tpm_init() must be deferred to grub_tpm_measure().
For vTPM support to work on PowerVM, system driver levels 1010.30
or 1020.00 are required.
Note: Previous versions of firmware levels with the 2hash-ext-log
API call have a bug that, once this API call is invoked, has the
effect of disabling the vTPM driver under Linux causing an error
message to be displayed in the Linux kernel log. Those users will
have to update their machines to the firmware levels mentioned
above.
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
When working on memory, it's nice to be able to test your work.
Add a memtest module. When compiled with --enable-mm-debug, it exposes
3 commands:
* lsmem - print all allocations and free space in all regions
* lsfreemem - print free space in all regions
* stress_big_allocs - stress test large allocations:
- how much memory can we allocate in one chunk?
- how many 1MB chunks can we allocate?
- check that gap-filling works with a 1MB aligned 900kB alloc + a
100kB alloc.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
As a legacy support, if the vector 5 is not implemented, Power Hypervisor will
consider the max CPUs as 64 instead 256 currently supported during
client-architecture-support negotiation.
This patch implements the vector 5 and set the MAX CPUs to 256 while setting the
others values to 0 (default).
Signed-off-by: Diego Domingos <diegodo@linux.vnet.ibm.com>
Acked-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Avnish Chouhan <avnish@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Benjamin Herrenschmidt