mirror of
https://git.savannah.gnu.org/git/grub.git
synced 2026-10-21 06:49:35 +00:00
okuji
973e6f4129
Update the netboot stuff to Etherboot-5.0.5. * configure.in (--enable-3c590): Removed. This was a mistake. (--enable-davicom): New option. (--enable-eepro): Likewise. (--enable-natsemi): Likewise. (--enable-ni5010): Likewise. (--enable-sis900): Likewise. (--enable-w89c840): Likewise. (--enable-3c509-hack): Removed. (--enable-ns8390-force-16bit): Likewise. * netboot/Makefile.am (libdrivers_a_SOURCES): Added timer.c and timer.h. (EXTRA_libdrivers_a_SOURCES): Added davicom.c, eepro.c, fa311.c, natsemi.c, ni5010.c, sis900.c, sis900.h, tlan.c and w89c840.c. (EXTRA_DIST): Added sis900.txt. (3c595_drivers): Remove 3c590.o from this. (davicom_drivers): New variable. (eepro_drivers): Likewise. (natsemi_drivers): Likewise. (ni5010_drivers): Likewise. (sis900_drivers): Likewise. (w89c840_drivers): Likewise. (3c590_o_CFLAGS): Removed. (davicom_o_CFLAGS): New variable. (eepro_o_CFLAGS): Likewise. (natsemi_o_CFLAGS): Likewise. (ni5010_o_CFLAGS): Likewise. (sis900_o_CFLAGS): Likewise. (w89c840_o_CFLAGS): Likewise. * netboot/davicom.c: New file, from Etherboot-5.0.5. * netboot/eepro.c: Likewise. * netboot/natsemi.c: Likewise. * netboot/ni5010.c: Likewise. * netboot/sis900.c: Likewise. * netboot/sis900.h: Likewise. * netboot/sis900.txt: Likewise. * netboot/timer.c: Likewise. * netboot/timer.h: Likewise. * netboot/w89c840.c: Likewise. * netboot/fa311.c: Likewise. * netboot/tlan.c: Likewise. * netboot/3c509.c: Copied from Etherboot-5.0.5. * netboot/3c509.h: Likewise. * netboot/3c595.c: Likewise. * netboot/3c90x.c: Likewise. * netboot/3c90x.txt: Likewise. * netboot/cards.h: Likewise. * netboot/cs89x0.c: Likewise. * netboot/depca.c: Likewise. * netboot/eepro100.c: Likewise. * netboot/epic100.c: Likewise. * netboot/i82586.c: Likewise. * netboot/lance.c: Likewise. * netboot/linux-asm-string.h: Likewise. * netboot/nic.h: Likewise. * netboot/ns8390.c: Likewise. * netboot/ns8390.h: Likewise. * netboot/otulip.c: Likewise. * netboot/pci.h: Likewise. * netboot/rtl8139.c: Likewise. * netboot/sk_g16.c: Likewise. * netboot/smc9000.c: Likewise. * netboot/tiara.c: Likewise. * netboot/tulip.c: Likewise. * netboot/via-rhine.c: Likewise. * netboot/config.c: Applied a diff between Etherboot-4.6.18 and Etherboot-5.0.5 manually. * netboot/main.c: Likewise. * netboot/pci.c: Likewise. * netboot/etherboot.h: Rewritten mostly from scratch, based on the same file in Etherboot-5.0.5. * netboot/misc.c: Likewise. * netboot/osdep.h: Likewise. * netboot/fsys_tftp.c (GRUB): Defined. (buf_fill): Use rfc2131_sleep_interval instead of rfc951_sleep. * stage2/builtins.c [SUPPORT_NETBOOT] (GRUB): Defined. (boot_func) [SUPPORT_NETBOOT]: Call cleanup_net. * stage2/cmdline.c [SUPPORT_DISKLESS] (GRUB): Defined. * stage2/common.c [SUPPORT_DISKLESS] (GRUB): Likewise.
169 lines
4.0 KiB
Plaintext
169 lines
4.0 KiB
Plaintext
You can use the netboot support to download OS images from a network.
|
|
Nearly all the device drivers are coming from the network-based boot
|
|
loader, Etherboot. Please visit its web page. They have rich
|
|
documentations so you will be able to get useful information from there.
|
|
The URL is <http://etherboot.sourceforge.net/>.
|
|
|
|
These below are common options for configure. Perhaps you may not need
|
|
to specify them.
|
|
|
|
--disable-packet-retransmission
|
|
Turns off packet retransmission. Use it on an empty network, where
|
|
no packet collision can happen.
|
|
|
|
--enable-pci-direct
|
|
Define this for PCI BIOSes that do not implement BIOS32 or not
|
|
correctly.
|
|
|
|
--enable-diskless
|
|
Enable the diskless support. If specified, you will get two optional
|
|
images, called "nbgrub" and "pxegrub". The former is the ``Net Boot
|
|
Image Proposal'' format, which is used by Etherboot and Netboot, while
|
|
the latter is the ``Preboot Execution Environment" format, which is
|
|
used by a PXE ROM. You may buy a PXE ROM from some companies.
|
|
|
|
Here is the information about the device drivers. They are all disabled
|
|
by default, so you must specify configure options to enable drivers you
|
|
want to use. Some drivers have extra per-driver options, so the extra
|
|
options are also described below.
|
|
|
|
Caution: You should enable them as you need. Don't enable any
|
|
unnecessary driver, because GRUB might crash if you include too many
|
|
drivers at the same time.
|
|
|
|
3Com509, ISA/EISA
|
|
--enable-3c509
|
|
|
|
3Com529 == MCA 3c509
|
|
--enable-3c529
|
|
|
|
3Com59x and 3Com900
|
|
--enable-3c595
|
|
|
|
3Com90x
|
|
--enable-3c90x
|
|
|
|
Crystal Semiconductor CS89x0
|
|
--enable-cs89x0
|
|
--enable-cs-scan=LIST
|
|
Probe for CS89x0 base address using LIST of comma separated hex
|
|
addresses; increasing the address by one (0x300 -> 0x301) will force
|
|
a more aggressive probing algorithm. This might be neccessary after
|
|
a soft-reset of the NIC.
|
|
|
|
Davicom DM9102 and 9009
|
|
--enable-davicom
|
|
|
|
Digital DE100 and DE200
|
|
--enable-depca
|
|
|
|
Intel Etherexpress Pro/10 (ISA card)
|
|
--enable-eepro
|
|
|
|
Intel Etherexpress Pro/100
|
|
--enable-eepro100
|
|
|
|
SMC 83c170 EPIC/100
|
|
--enable-epic100
|
|
|
|
3Com507
|
|
--enable-3c507
|
|
|
|
EXOS205
|
|
--enable-exos205
|
|
|
|
Racal-Interlan NI5210
|
|
--enable-ni5210
|
|
|
|
Lance PCI PCNet/32
|
|
AMD HomePNA
|
|
--enable-lance
|
|
|
|
Novell NE2100 and NE1500
|
|
--enable-ne2100
|
|
|
|
Racal-Interlan NI6510
|
|
--enable-ni6510
|
|
|
|
National Semiconductor DP8381x (Netgear FA311 and FA312)
|
|
--enable-natsemi
|
|
|
|
Racal-Interlan NI5010
|
|
--enable-ni5010
|
|
|
|
3Com503, aka Etherlink II, also /16 model
|
|
--enable-3c503
|
|
--enable-3c503-shmem
|
|
Use 3c503 shared memory mode.
|
|
--enable-3c503-aui
|
|
Use AUI by default on 3c503 cards.
|
|
|
|
NE1000/2000 and clones (ISA)
|
|
--enable-ne
|
|
--enable-ne-scan=LIST (0x280,0x300,0x320,0x340)
|
|
Probe for NE base address using LIST of comma separated hex
|
|
addresses.
|
|
|
|
NE2000 PCI clone (RTL8029)
|
|
Winbond 86C940
|
|
Compex RL2000
|
|
KTI ET32P2
|
|
NetVin 5000SC
|
|
Holtek 80232
|
|
--enable-ns8390
|
|
--enable-compex-rl2000-fix
|
|
If you have a Compex RL2000 PCI 32-bit (11F6:1401), and the probe
|
|
hangs in "Probing...[NE*000/PCI]", try enabling this fix... it
|
|
worked for me :).
|
|
|
|
WD8003/8013, SMC8216/8416
|
|
--enable-wd
|
|
--enable-wd-default-mem=MEM (0xCC000)
|
|
Default memory location for WD/SMC cards.
|
|
|
|
Old base driver for Tulip clones
|
|
--enable-otulip
|
|
|
|
Realtek 8139
|
|
SMC 1211
|
|
D-Link DFE530TX+ and DFE538TX
|
|
--enable-rtl8139
|
|
|
|
SIS 900 and SIS 7016
|
|
--enable-sis900
|
|
|
|
Schneider and Koch G16
|
|
--enable-sk-g16
|
|
|
|
SMC9000
|
|
--enable-smc9000
|
|
--enable-smc9000-scan=LIST
|
|
List of I/O addresses to probe.
|
|
|
|
Tiara, Fujitsu Lancard
|
|
--enable-tiara
|
|
|
|
Linksys LNE100TX and other NICs using this Tulip clone chip
|
|
Netgear FA310TX and other NICs using this Tulip clone chip
|
|
Tulip clones based on the ADMtek Centaur-P
|
|
Tulip clones based on the Macronix 987x5
|
|
Tulip-Fast
|
|
Tulip+
|
|
Tulip 21142
|
|
ASIX AX88140
|
|
Intel Tulip
|
|
Compex RL100-TX
|
|
--enable-tulip
|
|
|
|
Rhine-I, e.g. D-Link DFE-530TX
|
|
Rhine-II
|
|
--enable-via-rhine
|
|
|
|
Winbond W89c840
|
|
Compex RL100-ATX
|
|
--enable-w89c840
|
|
|
|
|
|
The description about how to use the support can be found in the GRUB
|
|
manual. Run "info grub" in the shell prompt.
|