* stage2/char_io.c [!GRUB_UTIL] (memcpy): New function. It is
defined as an alias of grub_memmove. This is copied from GRUB 2.
* stage2/disk_io.c (print_completions): Simplified conditionals
to make it easier to edit the file with Emacs.
Added support for (cd).
(set_device): Likewise.
* stage2/common.c (init_bios_info): Check if BOOT_DRIVE is a
CDROM drive. If it is true, set CDROM_DRIVE to BOOT_DRIVE.
(cdrom_drive): New variable.
From Leonid Lisovskiy <lly@pisem.net>:
* stage2/start_eltorito.S: New file.
* stage2/stage2.c (run_menu): Use GRUB_INVALID_DRIVE instead of
0xFF.
* stage2/shared.h (STAGE2_ID_ISO9660_STAGE1_5): New macro.
[FSYS_ISO9660] (STAGE2_ID): Set to STAGE2_ID_ISO9660_STAGE1_5.
(struct geometry): Added a new member ``sector_size''.
(BIOSDISK_FLAG_CDROM): New macro.
(cdrom_drive): Declared.
* stage2/fsys_iso9660.c: New file.
* stage2/iso9660.h: Likewise.
* stage2/filesys.h (FSYS_ISO9660_NUM): New macro.
[FSYS_ISO9660] (iso9660_mount): Declared.
[FSYS_ISO9660] (iso9660_read): Likewise.
[FSYS_ISO9660] (iso9660_dir): Likewise.
(NUM_FSYS): Added FSYS_ISO9660_NUM.
* stage2/disk_io.c (fsys_table) [FSYS_ISO9660]: Added iso9660.
(current_drive): Use GRUB_INVALID_DRIVE.
(log2): New function.
(rawread): Use BUF_GEOM.SECTOR_SIZE instead of SECTOR_SIZE.
Change the type of BUFADDR from int to char *.
Use a virtual track to make sure that one track fits in the
buffer.
(sane_partition): Allow CURRENT_DRIVE to be CDROM_DRIVE, because
a bios drive for a CD-ROM is often assigned to greater than
0x88.
(set_device): Use GRUB_INVALID_DRIVE instead of 0xFF.
(setup_part): Likewise.
* stage2/cmdline.c (init_cmdline): Use GRUB_INVALID_DRIVE.
* stage2/builtins.c (install_func): Use GRUB_INVALID_DRIVE.
(setup_func): Added iso9660_stage1_5.
* stage2/bios.c (biosdisk): Don't fall back to the CHS mode
if the drive is a CDROM.
(get_cdinfo): New function.
(get_diskinfo): Call get_cdinfo if the drive is greater than or
equal to 0x88 or the drive supports LBA.
Set the sector size to SECTOR_SIZE if it is not a CD-ROM.
* stage2/asm.S (biosdisk_int13_extensions): Take a word
argument AX instead of a byte argument AH.
(get_diskinfo_int13_extensions): Removed.
* stage2/Makefile.am (noinst_HEADERS): Added iso9660.h.
(libgrub_a_SOURCES): Added fsys_iso9660.c.
(libgrub_a_CFLAGS): Added -DFSYS_ISO9660=1.
(pkgdata_DATA): Added iso9660_stage1_5 and stage2_eltorito.
(noinst_PROGRAMS): Added iso9660_stage1_5.exec and
start_eltorito.exec.
(noinst_DATA): Added start_eltorito.
(pre_stage2_exec_SOURCES): Added fsys_iso9660.c.
(START_ELTORITO_LINK): New variable.
(start_eltorito_exec_SOURCES): Likewise.
(start_eltorito_exec_CCASFLAGS): Likewise.
(start_eltorito_exec_LDFLAGS): Likewise.
(start_eltorito_exec-start.$(OBJEXT)): New dependency.
(stage2_eltorito): New target.
(iso9660_stage1_5_exec_SOURCES): New variable.
(iso9660_stage1_5_exec_CFLAGS): Likewise.
(iso9660_stage1_5_exec_CCASFLAGS): Likewise.
(iso9660_stage1_5_exec_LDFLAGS): Likewise.
* stage1/stage1.h (GRUB_INVALID_DRIVE): New macro.
* stage1/stage1.S (boot_drive): Use the macro GRUB_INVALID_DRIVE.
(real_start): Likewise.
* lib/device.c (get_drive_geometry): Set GEOM->SECTOR_SIZE to
SECTOR_SIZE by default.
* configure.ac (--disable-iso9660): New option.
* stage2/terminfo.c (ti_set_term): Use a pointer to struct
terminfo instead to avoid GCC's bug, which inserts a reference
to memcpy implicitly.
(ti_get_term): Likewise.
All callers are fixed.
* stage2/terminfo.h (ti_set_term): Updated.
(ti_get_term): Likewise.
* stage2/shared.h (struct linux_kernel_header): New member,
initrd_max_address. Defined in the boot protocol 2.03 or higher.
* stage2/boot.c (load_initrd): If the boot protocol is greater
than or equal to 2.03, use the field ``initrd_max_address''
instead of LINUX_INITRD_MAX_ADDRESS.
* lib/device.c (check_device): If DEVICE is empty, just return
1.
(get_scsi_disk_name) [__QNXNTO__]: Make NAME empty, because SCSI
disks are detected as IDE disks on QNX RTP.
From Taketo Kabe <kabe@sra-tohoku.co.jp>:
* lib/device.c (get_ide_disk_name) [__QNXNTO__]: Set NAME to
"/dev/hdX".
(get_floppy_disk_name) [__QNXNTO__]: Set NAME to "/dev/fdX".
* stage2/mb_info.h (struct AddrRangeDesc): Specified with the
attribute packed.
* stage2/shared.h (struct mmar_desc): Likewise.
From H.J. Lu <hjl@gnu.org>:
* stage2/disk_io.c (part_start): Use unsigned long to support
large disks.
(part_length): Likewise.
* stage2/shared.h (part_start): Likewise.
(part_length): Likewise.
Change the terminal structure a bit, to turn the cursor state
explicitly. Suggested by Pavel Roskin.
* stage2/term.h (struct term_entry): Remove the member
`nocursor' and add `setcursor'.
[!STAGE1_5] (console_setcursor): New prototype.
[SUPPORT_HERCULES] (hercules_setcursor): Likewise.
[!STAGE1_5] (console_nocursor): Removed.
[SUPPORT_HERCULES] (hercules_nocursor): Likewise.
* stage2/stage2.c (run_menu): Call setcursor instead of
nocursor.
Call setcursor with 1 before starting a boot entry.
* stage2/shared.h (nocursor): Removed.
(setcursor): New prototype.
* stage2/hercules.c (herc_cursor_state): New variable.
(herc_turn_cursor): Removed.
(hercules_nocursor): Likewise.
(hercules_setcursor): New function.
* stage2/char_io.c (get_cmdline): Turn on the cursor at the
beginning, and restore it before returning.
(nocursor): Removed.
(setcursor): New function.
* stage2/asm.S (console_cursor_state): New variable.
(console_cursor_shape): Likewise.
(console_setcursor): New function.
(console_nocursor): Removed.
* grub/asmstub.c (console_setcursor): New function.
(hercules_setcursor): Likewise.
(console_nocursor): Removed.
(hercules_nocursor): Likewise.
* stage2/boot.c (load_image): Rewrite the Linux booting support
radically. Now it should work even on a machine having, say,
only 128KB, theoretically. Of course, GRUB itself doesn't work
on such a system, though.
(load_initrd): Initialize LH based on CUR_ADDR, because the
location becomes dynamic.
* stage2/shared.h (LINUX_MAX_SETUP_SECTS): Set to 64.
(LINUX_HEAP_END_OFFSET): Set to (0x9000 - 0x200).
(LINUX_STAGING_AREA): Removed.
(LINUX_SETUP): Likewise.
(LINUX_KERNEL): Likewise.
(LINUX_KERNEL_MAXLEN): Likewise.
(LINUX_SETUP_SEG): Likewise.
(LINUX_INIT_SEG): Likewise.
(LINUX_SETUP_STACK): Set to 0x9000.
(LINUX_BZIMAGE_ADDR): New macro.
(LINUX_ZIMAGE_ADDR): Likewise.
(LINUX_OLD_REAL_MODE_ADDR): Likewise.
(CL_MY_LOCATION): Removed.
(CL_MY_END_ADDR): Likewise.
(CL_BASE_ADDR): Likewise.
(CL_MAGIC): Renamed to ...
(LINUX_CL_MAGIC): ... this.
(LINUX_CL_OFFSET): New macro.
(LINUX_CL_END_OFFSET): Likewise.
(LINUX_SETUP_MOVE_SIZE): Likewise.
(struct linux_kernel_header): Change the type of the member
"cmd_line_ptr" to char *.
(linux_data_tmp_addr): Declared.
(linux_data_real_addr): Likewise.
* stage2/asm.S [!STAGE1_5] (linux_data_tmp_addr): New variable.
[!STAGE1_5] (linux_data_real_addr): Likewise.
[!STAGE1_5] (big_linux_boot): Copy the real mode part from
LINUX_DATA_TMP_ADDR to LINUX_DATA_REAL_ADDR.
* grub/asmstub.c (linux_data_tmp_addr): New variable.
(linux_data_real_addr): Likewise.
* stage2/shared.h (boot_part_offset): Removed.
* stage2/disk_io.c (set_bootdev): Copy the partition information
here. Now this function can call rawread, so it can fail.
(boot_part_offset): Removed.
* stage2/builtins.c (boot_func): Don't copy the partition
information here.
(real_root_func): Check ERRNUM after calling set_bootdev.
* stage2/boot.c (linux_mem_size): New variable.
(load_image): Check a mem= option and set LINUX_MEM_SIZE to the
specified memory size, if any. Otherwise, to zero. When an
overflow is detected, use LINUX_INITRD_MAX_ADDRESS instead.
(load_initrd): If LINUX_MEM_SIZE is non-zero, use it instead of
the actual memory size.
* stage2/char_io.c (safe_parse_maxint): Use ERR_NUMBER_OVERFLOW
instead of ERR_NUMBER_PARSING, when an overflow occurs.
* stage2/common.c [!STAGE1_5] (err_list): Added
ERR_NUMBER_OVERFLOW.
* stage2/shared.h (ERR_NUMBER_OVERFLOW): New constant.
An internal pager is implemented.
* stage2/builtins.c (pager_func): New function.
(builtin_pager): New variable.
(terminal_func): New option, "--lines=LINES" is added. If this
option is specified, set MAX_LINES to the value. Otherwise, set
MAX_LINES to 24.
(vbeprobe_func): Remove the pager code specific to this
function.
(builtin_table): Added a pointer to BUILTIN_PAGER.
* stage2/char_io.c (max_lines) [!STAGE1_5]: New variable.
(count_lines) [!STAGE1_5]: Likewise.
(use_pager) [!STAGE1_5]: Likewise.
(grub_putchar) [!STAGE1_5]: if C is a newline and COUNT_LINES is
not -1, count up the number of lines. If it exceeds the maximum
number of lines minus 2, show a message and wait for input of
return key. "minus 2" is to reserve space for the message
printed by this internal pager.
* stage2/cmdline.c (enter_cmdline): If USE_PAGER is true, set
COUNT_LINES to zero, before running a command, and reset
COUNT_LINES to -1 after that.
* stage2/shared.h (max_lines) [!STAGE1_5]: Declared.
(count_lines) [!STAGE1_5]: Likewise.
(use_pager) [!STAGE1_5]: Likewise.
* grub/main.c (use_preset_menu): New variable.
(OPT_PRESET_MENU): New macro.
(longopts): Added an entry for "--preset-menu".
(usage): Added a description for "--preset-menu". Also, change
the first character of the description for "--device-map" to
lower case for consistency.
(main): Set USE_PRESET_MENU to 1 in the case of OPT_PRESET_MENU.
* stage2/shared.h (use_preset_menu): Declared.
* stage2/stage2.c [PRESET_MENU_STRING || SUPPORT_DISKLESS]
(open_preset_menu) [GRUB_UTIL]: If USE_PRESET_MENU is false,
return zero immediately.
assignments received by the FSF.
Jason Thomas was added.
Erich Stefan Boleyn was moved into those who assigned their copyrights.
Gordon Matzigkeit was moved into the others, because he still wasn't listed
in fencepost.gnu.org:/gd/gnuorg/copyright.list.
The remaining problem is that we haven't had copyright assignments of
VaX#8, Heiko Schroeder and Gordon Matzigkeit. As for the first two, Erich
is now trying to contact them by proxy. So I'm just waiting.
As for Gordon.... oh, what are you doing, Gordon?! Hurry up, please!
okuji