* stage2/char_io.c [!GRUB_UTIL] (memcpy): New function. It is
defined as an alias of grub_memmove. This is copied from GRUB 2.
* stage2/disk_io.c (print_completions): Simplified conditionals
to make it easier to edit the file with Emacs.
Added support for (cd).
(set_device): Likewise.
* stage2/common.c (init_bios_info): Check if BOOT_DRIVE is a
CDROM drive. If it is true, set CDROM_DRIVE to BOOT_DRIVE.
(cdrom_drive): New variable.
From Leonid Lisovskiy <lly@pisem.net>:
* stage2/start_eltorito.S: New file.
* stage2/stage2.c (run_menu): Use GRUB_INVALID_DRIVE instead of
0xFF.
* stage2/shared.h (STAGE2_ID_ISO9660_STAGE1_5): New macro.
[FSYS_ISO9660] (STAGE2_ID): Set to STAGE2_ID_ISO9660_STAGE1_5.
(struct geometry): Added a new member ``sector_size''.
(BIOSDISK_FLAG_CDROM): New macro.
(cdrom_drive): Declared.
* stage2/fsys_iso9660.c: New file.
* stage2/iso9660.h: Likewise.
* stage2/filesys.h (FSYS_ISO9660_NUM): New macro.
[FSYS_ISO9660] (iso9660_mount): Declared.
[FSYS_ISO9660] (iso9660_read): Likewise.
[FSYS_ISO9660] (iso9660_dir): Likewise.
(NUM_FSYS): Added FSYS_ISO9660_NUM.
* stage2/disk_io.c (fsys_table) [FSYS_ISO9660]: Added iso9660.
(current_drive): Use GRUB_INVALID_DRIVE.
(log2): New function.
(rawread): Use BUF_GEOM.SECTOR_SIZE instead of SECTOR_SIZE.
Change the type of BUFADDR from int to char *.
Use a virtual track to make sure that one track fits in the
buffer.
(sane_partition): Allow CURRENT_DRIVE to be CDROM_DRIVE, because
a bios drive for a CD-ROM is often assigned to greater than
0x88.
(set_device): Use GRUB_INVALID_DRIVE instead of 0xFF.
(setup_part): Likewise.
* stage2/cmdline.c (init_cmdline): Use GRUB_INVALID_DRIVE.
* stage2/builtins.c (install_func): Use GRUB_INVALID_DRIVE.
(setup_func): Added iso9660_stage1_5.
* stage2/bios.c (biosdisk): Don't fall back to the CHS mode
if the drive is a CDROM.
(get_cdinfo): New function.
(get_diskinfo): Call get_cdinfo if the drive is greater than or
equal to 0x88 or the drive supports LBA.
Set the sector size to SECTOR_SIZE if it is not a CD-ROM.
* stage2/asm.S (biosdisk_int13_extensions): Take a word
argument AX instead of a byte argument AH.
(get_diskinfo_int13_extensions): Removed.
* stage2/Makefile.am (noinst_HEADERS): Added iso9660.h.
(libgrub_a_SOURCES): Added fsys_iso9660.c.
(libgrub_a_CFLAGS): Added -DFSYS_ISO9660=1.
(pkgdata_DATA): Added iso9660_stage1_5 and stage2_eltorito.
(noinst_PROGRAMS): Added iso9660_stage1_5.exec and
start_eltorito.exec.
(noinst_DATA): Added start_eltorito.
(pre_stage2_exec_SOURCES): Added fsys_iso9660.c.
(START_ELTORITO_LINK): New variable.
(start_eltorito_exec_SOURCES): Likewise.
(start_eltorito_exec_CCASFLAGS): Likewise.
(start_eltorito_exec_LDFLAGS): Likewise.
(start_eltorito_exec-start.$(OBJEXT)): New dependency.
(stage2_eltorito): New target.
(iso9660_stage1_5_exec_SOURCES): New variable.
(iso9660_stage1_5_exec_CFLAGS): Likewise.
(iso9660_stage1_5_exec_CCASFLAGS): Likewise.
(iso9660_stage1_5_exec_LDFLAGS): Likewise.
* stage1/stage1.h (GRUB_INVALID_DRIVE): New macro.
* stage1/stage1.S (boot_drive): Use the macro GRUB_INVALID_DRIVE.
(real_start): Likewise.
* lib/device.c (get_drive_geometry): Set GEOM->SECTOR_SIZE to
SECTOR_SIZE by default.
* configure.ac (--disable-iso9660): New option.
* stage2/terminfo.c (ti_set_term): Use a pointer to struct
terminfo instead to avoid GCC's bug, which inserts a reference
to memcpy implicitly.
(ti_get_term): Likewise.
All callers are fixed.
* stage2/terminfo.h (ti_set_term): Updated.
(ti_get_term): Likewise.
* stage2/shared.h (struct linux_kernel_header): New member,
initrd_max_address. Defined in the boot protocol 2.03 or higher.
* stage2/boot.c (load_initrd): If the boot protocol is greater
than or equal to 2.03, use the field ``initrd_max_address''
instead of LINUX_INITRD_MAX_ADDRESS.
From Tilmann Bubeck:
* stage2/builtins.c [SUPPORT_SERIAL] (terminfo_func): Unescape
arguments before copying them, and escape sequences before
printing them.
* stage2/terminfo.h (TERMINFO_LEN): Changed to 40.
Add a workaround for buggy BIOSes which don't pass boot drive
correctly. The idea is that GRUB forces the fixed disk flag
when booted from a hard disk. When BIOS loads GRUB directly,
the boot drive must be either of 0x00 and 0x80, so this should
work, if those BIOSes always pass zero to %dl. AFAIK, this
assumption is always correct.
* stage2/builtins.c (install_func): Store the fixed disk flag of
the destination drive in BOOT_DRIVE_MASK in Stage 1.
* stage1/stage1.h (STAGE1_BOOT_DRIVE_MASK): New macro.
* stage1/stage1.S (boot_drive_mask): New variable. It is or'ed
to %dl.
* stage2/shared.h (boot_part_offset): Removed.
* stage2/disk_io.c (set_bootdev): Copy the partition information
here. Now this function can call rawread, so it can fail.
(boot_part_offset): Removed.
* stage2/builtins.c (boot_func): Don't copy the partition
information here.
(real_root_func): Check ERRNUM after calling set_bootdev.
* stage2/builtins.c [SUPPORT_SERIAL || SUPPORT_HERCULES]
(terminal_func): Set CURRENT_TERM to each of selected terminals
before calling grub_printf, and restore CURRENT_TERM after it.
Reported by Ilguiz Latypov.
Prepend a carriage return to the prompting message, because it
is ugly that the same messages fulfill the whole screen.
* stage2/builtins.c (boot_func): Load the boot partition
information, only if the address of the boot partition entry is
set appropriately.
(real_root_func): If ATTEMPT_MOUNT is false, call open_partition
and if successful, call set_bootdev, to set the offset of the
boot partition and the address of the boot paetition entry.
IF ATTEMPT_MOUNT is false, don't set BOOTDEV. The BSD evil hack
is useless with the command "rootnoverify" anyway.
* stage2/disk_io.c (boot_part_addr): Initialized with zero
explicitly, to emphasize that it is invalid.
* stage2/builtins.c (boot_func): If DEBUG is true, print
BOOT_DRIVE and BOOT_PART_OFFSET.
Don't set ERRNUM after rawread failed, because rawread should
set ERRNUM itself.
* stage2/builtins.c [GRUB_UTIL] (dump_func): New function.
[GRUB_UTIL] (builtin_dump): New variable.
(builtin_table) [GRUB_UTIL]: Added a pointer to BUILTIN_DUMP.
* util/grub-install.in: Make sure that GRUB reads the same
images as the host operating system by comparing the result of
running the command "dump" with the contents of the OS file.
An internal pager is implemented.
* stage2/builtins.c (pager_func): New function.
(builtin_pager): New variable.
(terminal_func): New option, "--lines=LINES" is added. If this
option is specified, set MAX_LINES to the value. Otherwise, set
MAX_LINES to 24.
(vbeprobe_func): Remove the pager code specific to this
function.
(builtin_table): Added a pointer to BUILTIN_PAGER.
* stage2/char_io.c (max_lines) [!STAGE1_5]: New variable.
(count_lines) [!STAGE1_5]: Likewise.
(use_pager) [!STAGE1_5]: Likewise.
(grub_putchar) [!STAGE1_5]: if C is a newline and COUNT_LINES is
not -1, count up the number of lines. If it exceeds the maximum
number of lines minus 2, show a message and wait for input of
return key. "minus 2" is to reserve space for the message
printed by this internal pager.
* stage2/cmdline.c (enter_cmdline): If USE_PAGER is true, set
COUNT_LINES to zero, before running a command, and reset
COUNT_LINES to -1 after that.
* stage2/shared.h (max_lines) [!STAGE1_5]: Declared.
(count_lines) [!STAGE1_5]: Likewise.
(use_pager) [!STAGE1_5]: Likewise.
assignments received by the FSF.
Jason Thomas was added.
Erich Stefan Boleyn was moved into those who assigned their copyrights.
Gordon Matzigkeit was moved into the others, because he still wasn't listed
in fencepost.gnu.org:/gd/gnuorg/copyright.list.
The remaining problem is that we haven't had copyright assignments of
VaX#8, Heiko Schroeder and Gordon Matzigkeit. As for the first two, Erich
is now trying to contact them by proxy. So I'm just waiting.
As for Gordon.... oh, what are you doing, Gordon?! Hurry up, please!
clear the active flag of each of the loaded partition entries,
and then set the active flag of the booted partition image.
VS: ----------------------------------------------------------------------
okuji