Surpass 1 TiB disk addressing limit. Note: there are no plans to handle
the 2 TiB disk limit in GRUB Legacy, since that would need considerable
rework. If you have >2TiB disks, use GRUB 2 instead.
* grub/asmstub.c (biosdisk): Add unsigned qualifier to `sector'.
* stage2/bios.c (biosdisk): Likewise.
* stage2/disk_io.c (rawread, devread, rawwrite, devwrite): Likewise.
* stage2/shared.h (rawread, devread, rawwrite, devwrite): Likewise.
* lib/device.c (get_drive_geometry): Replace BLKGETSIZE with
BLKGETSIZE64.
* stage2/builtins.c (setup_func): Specify the size of DEVICE to
grub_strncat instead of a strange number 256. Reported by Vitaly
Fertman <vitaly@namesys.com>.
* stage2/fsys_xfs.c (next_dentry): Use arrays of arrays instead of
arrays of pointers for USUAL, to avoid read-only strings. Reported
by Sven Wegener <swegener@gentoo.org>.
* stage2/fsys_fat.c (fat_mount): Ignore the 3rd bit of a media
descriptor, because some BIOSes overwrite this value, according
to the storage mode (e.g. USB Floppy or USB HDD).
* stage2/builtins.c (install_func): If DEST_DRIVE is a hard
disk, enable the workaround in Stage 1 by replacing the jmp
with double nop's.
* stage1/stage1.h (STAGE1_BOOT_DRIVE_CHECK): New macro.
(STAGE1_BOOT_DRIVE_MASK): Removed.
* stage1/stage1.S (boot_drive_check): New label. This implements
a different workaround for buggy BIOSes which don't pass boot
drive correctly. This is effective for BIOSes which pass a value
without the seventh bit (0x80).
(boot_drive_mask): Removed.
This is a big change on saving a default entry. This change
makes it possible to set up a quite robust system using GRUB.
Now we do not use the second sector of Stage 2 to store an
entry number but use the file /boot/grub/default. This file
must be generated by grub-set-default, although this file is
plain-text.
* util/grub-set-default.in: New file.
* util/grub-install.in (grub_set_default): New variable.
Use /grub instead of /boot/grub on OpenBSD as well as NetBSD.
Run grub-set-default to make a default file.
* util/Makefile.am (sbin_SCRIPTS): Added grub-set-default.
* stage2/stage2.c (run_menu): Change the fallback handling to
support multiple fallback entries.
(cmain): Likewise. Also, get a saved entry from a default file
if possible, before reading a config file.
* stage2/shared.h (DEFAULT_FILE_BUF): New macro.
(DEFAULT_FILE_BUFLEN): Likewise.
(CMDLINE_BUF): Set to DEFAULT_FILE_BUF + DEFAULT_FILE_BUFLEN.
(MENU_BUFLEN): Set to 0x8000 + PASSWORD_BUF - MENU_BUF.
(fallback_entry): Removed.
(fallback_entries): Declared.
(fallback_entryno): Likewise.
(MAX_FALLBACK_ENTRIES): New macro.
* stage2/cmdline.c (run_script): Use FALLBACK_ENTRYNO instead of
FALLBACK_ENTRY.
* stage2/builtins.c (fallback_entry): Removed.
(fallback_entryno): New variable.
(fallback_entries): Likewise.
(init_config): Initialize FALLBACK_ENTRYNO and FALLBACK_ENTRIES.
(fallback_func): Rewritten completely.
(savedefault_func): Likewise.
* docs/grub.texi (grub-set-default): New direntry.
(Installation): Describe grub-set-default for manual
installations.
(Making your system robust): New section.
(Booting once-only): New subsection.
(Booting fallback systems): Likewise.
(fallback): Describe multiple fallback entries.
(savedefault): Describe an optional argument.
(Invoking grub-set-default): New chapter.
(Future): Replaced with a description about GRUB 2.
* configure.ac (AC_CONFIG_FILES): Added util/grub-set-default.
* stage2/char_io.c (grub_isspace): Use a switch sentense instead
of an if sentense, because that reduces the size.
* lib/device.c (read_device_map): Change the max number of DRIVE
to 127 from 8. This was too strict.
* stage2/asm.S (stop_floppy): Call pusha and popa outside the
block of real mode code. Reported by Guillem Jover
<guillem@debian.org>.
* Makefile.am (AUTOMAKE_OPTIONS): Add "gnu".
* configure.ac: Update to work with automake 1.8, quote all
AC_DEFUN's correctly and provide descriptions for AC_DEFINE's.
* acinclude.m4: Likewise.
* acconfig.h: Removed.
* stage1/Makefile.am (.exec): Use suffix rules instead of pattern
rules.
* stage2/Makefile.am (.exec): Likewise.
* docs/grub.texi (Making a GRUB bootable CD-ROM): New section.
* stage2/disk_io.c (set_device): Use CH instead of *DEVICE to
test the first character of DEVICE, because DEVICE is
incremented.
Reported by Bernhard Treutwein.
* stage2/char_io.c [!GRUB_UTIL] (memcpy): New function. It is
defined as an alias of grub_memmove. This is copied from GRUB 2.
* stage2/disk_io.c (print_completions): Simplified conditionals
to make it easier to edit the file with Emacs.
Added support for (cd).
(set_device): Likewise.
* stage2/common.c (init_bios_info): Check if BOOT_DRIVE is a
CDROM drive. If it is true, set CDROM_DRIVE to BOOT_DRIVE.
(cdrom_drive): New variable.
From Leonid Lisovskiy <lly@pisem.net>:
* stage2/start_eltorito.S: New file.
* stage2/stage2.c (run_menu): Use GRUB_INVALID_DRIVE instead of
0xFF.
* stage2/shared.h (STAGE2_ID_ISO9660_STAGE1_5): New macro.
[FSYS_ISO9660] (STAGE2_ID): Set to STAGE2_ID_ISO9660_STAGE1_5.
(struct geometry): Added a new member ``sector_size''.
(BIOSDISK_FLAG_CDROM): New macro.
(cdrom_drive): Declared.
* stage2/fsys_iso9660.c: New file.
* stage2/iso9660.h: Likewise.
* stage2/filesys.h (FSYS_ISO9660_NUM): New macro.
[FSYS_ISO9660] (iso9660_mount): Declared.
[FSYS_ISO9660] (iso9660_read): Likewise.
[FSYS_ISO9660] (iso9660_dir): Likewise.
(NUM_FSYS): Added FSYS_ISO9660_NUM.
* stage2/disk_io.c (fsys_table) [FSYS_ISO9660]: Added iso9660.
(current_drive): Use GRUB_INVALID_DRIVE.
(log2): New function.
(rawread): Use BUF_GEOM.SECTOR_SIZE instead of SECTOR_SIZE.
Change the type of BUFADDR from int to char *.
Use a virtual track to make sure that one track fits in the
buffer.
(sane_partition): Allow CURRENT_DRIVE to be CDROM_DRIVE, because
a bios drive for a CD-ROM is often assigned to greater than
0x88.
(set_device): Use GRUB_INVALID_DRIVE instead of 0xFF.
(setup_part): Likewise.
* stage2/cmdline.c (init_cmdline): Use GRUB_INVALID_DRIVE.
* stage2/builtins.c (install_func): Use GRUB_INVALID_DRIVE.
(setup_func): Added iso9660_stage1_5.
* stage2/bios.c (biosdisk): Don't fall back to the CHS mode
if the drive is a CDROM.
(get_cdinfo): New function.
(get_diskinfo): Call get_cdinfo if the drive is greater than or
equal to 0x88 or the drive supports LBA.
Set the sector size to SECTOR_SIZE if it is not a CD-ROM.
* stage2/asm.S (biosdisk_int13_extensions): Take a word
argument AX instead of a byte argument AH.
(get_diskinfo_int13_extensions): Removed.
* stage2/Makefile.am (noinst_HEADERS): Added iso9660.h.
(libgrub_a_SOURCES): Added fsys_iso9660.c.
(libgrub_a_CFLAGS): Added -DFSYS_ISO9660=1.
(pkgdata_DATA): Added iso9660_stage1_5 and stage2_eltorito.
(noinst_PROGRAMS): Added iso9660_stage1_5.exec and
start_eltorito.exec.
(noinst_DATA): Added start_eltorito.
(pre_stage2_exec_SOURCES): Added fsys_iso9660.c.
(START_ELTORITO_LINK): New variable.
(start_eltorito_exec_SOURCES): Likewise.
(start_eltorito_exec_CCASFLAGS): Likewise.
(start_eltorito_exec_LDFLAGS): Likewise.
(start_eltorito_exec-start.$(OBJEXT)): New dependency.
(stage2_eltorito): New target.
(iso9660_stage1_5_exec_SOURCES): New variable.
(iso9660_stage1_5_exec_CFLAGS): Likewise.
(iso9660_stage1_5_exec_CCASFLAGS): Likewise.
(iso9660_stage1_5_exec_LDFLAGS): Likewise.
* stage1/stage1.h (GRUB_INVALID_DRIVE): New macro.
* stage1/stage1.S (boot_drive): Use the macro GRUB_INVALID_DRIVE.
(real_start): Likewise.
* lib/device.c (get_drive_geometry): Set GEOM->SECTOR_SIZE to
SECTOR_SIZE by default.
* configure.ac (--disable-iso9660): New option.
From Boji Tony Kannanthanam <boji.t.kannanthanam@intel.com>:
* util/grub-install.in (convert): Add support for ATARAID
device names.
* lib/device.c (get_ataraid_disk_name) [__linux__]: New
function.
(init_device_map) [__linux__]: Probe ATARAID disks.
* stage2/size_test (check): Don't use the local statement any
longer. It was unneeded actually. Reported by Paul Jarc.
From Yury V. Umanets <umka@namesys.com>:
* stage2/fsys_reiserfs.c (REISER3FS_SUPER_MAGIC_STRING): New
macro.
(reiserfs_mount): Added checks for ReiserFS 3.
(reiserfs_embed): Likewise.
2004-01-25 Yoshinori K. Okuji <okuji@enbug.org>
* docs/grub.texi (Obtaining and Building GRUB): Instead of
describing how to use the anoncvs method, specify the URL of
the description page on Savannah.
Reported by Bernhard Treutwein.
From Thomas Schwinge <kischde@gmx.net>:
* grub/Makefile.am (AM_CPPFLAGS): New variable.
(AM_CFLAGS): Removed all cpp flags.
* stage2/xfs.h (__int8_t): Renamed to ...
(xfs_int8_t): ... this.
(__uint8_t): Renamed to ...
(xfs_uint8_t): ... this.
(__int16_t): Renamed to ...
(xfs_int16_t): ... this.
(__uint16_t): Renamed to ...
(xfs_uint16_t): ... this.
(__int32_t): Renamed to ...
(xfs_int32_t): ... this.
(__uint32_t): Renamed to ...
(xfs_uint32_t): ... this.
(__int64_t): Renamed to ...
(xfs_int64_t): ... this.
(__uint64_t): Renamed to ...
(xfs_uint64_t): ... this.
All callers are changed.x
From Egmont Koblinger <egmont@uhulinux.hu>:
* util/grub-install.in: Support an install devices in GRUB's
notation without parentheses.
* docs/grub.texi (Installing GRUB using grub-install): Added an
example of using grub-install without parentheses.
* stage2/terminfo.c (ti_set_term): Use a pointer to struct
terminfo instead to avoid GCC's bug, which inserts a reference
to memcpy implicitly.
(ti_get_term): Likewise.
All callers are fixed.
* stage2/terminfo.h (ti_set_term): Updated.
(ti_get_term): Likewise.
* stage2/shared.h (struct linux_kernel_header): New member,
initrd_max_address. Defined in the boot protocol 2.03 or higher.
* stage2/boot.c (load_initrd): If the boot protocol is greater
than or equal to 2.03, use the field ``initrd_max_address''
instead of LINUX_INITRD_MAX_ADDRESS.
* stage2/fsys_ext2fs.c (ext2_is_fast_symlink): New function.
(ext2fs_dir): Use ext2_is_fast_symlink to check if the current
inode is a fast or slow symlink. This change was required
because Linux now uses acl seriously (i.e. incompatibility).
Reported by Chris PeBenito <pebenito@gentoo.org> and Seemant
Kulleen <seemant@gentoo.org>
Migrated to newer autotools. Also, don't install mkbimage
because its name is too general and it does not conform to the
GNU Coding Standards in some points.
* util/Makefile.am (EXTRA_DIST): New variable.
(sbin_SCRIPTS): Removed mkbimage.
(noinst_SCRIPTS): Added mkbimage.
* stage1/Makefile.am (AM_ASFLAGS): Renamed to ...
(AM_CCASFLAGS): ... this.
* stage2/Makefile.am (pre_stage2_exec_ASFLAGS): Renamed to ...
(pre_stage2_exec_CCASFLAGS): ... this.
(start_exec_ASFLAGS): Renamed to ...
(start_exec_CCASFLAGS): ... this.
(e2fs_stage1_5_exec_ASFLAGS): Renamed to ...
(e2fs_stage1_5_exec_CCASFLAGS): ... this.
(fat_stage1_5_exec_ASFLAGS): Renamed to ...
(fat_stage1_5_exec_CCASFLAGS): ... this.
(ffs_stage1_5_exec_ASFLAGS): Renamed to ...
(ffs_stage1_5_exec_CCASFLAGS): ... this.
(minix_stage1_5_exec_ASFLAGS): Renamed to ...
(minix_stage1_5_exec_CCASFLAGS): ... this.
(reiserfs_stage1_5_exec_ASFLAGS): Renamed to ...
(reiserfs_stage1_5_exec_CCASFLAGS): ... this.
(vstafs_stage1_5_exec_ASFLAGS): Renamed to ...
(vstafs_stage1_5_exec_CCASFLAGS): ... this.
(jfs_stage1_5_exec_ASFLAGS): Renamed to ...
(jfs_stage1_5_exec_CCASFLAGS): ... this.
(xfs_stage1_5_exec_ASFLAGS): Renamed to ...
(xfs_stage1_5_exec_CCASFLAGS): ... this.
(diskless_exec_ASFLAGS): Renamed to ...
(diskless_exec_CCASFLAGS): ... this.
(nbloader_exec_ASFLAGS): Renamed to ...
(nbloader_exec_CCASFLAGS): ... this.
(pxeloader_exec_ASFLAGS): Renamed to ...
(pxeloader_exec_CCASFLAGS): ... this.
* configure.in: Removed.
* configure.ac: New file. Mostly derived from configure.in.
From KB Sriram <mail_kb@yahoo.com>:
* stage2/disk_io.c (set_device) [SUPPORT_NETBOOT]: Added support
for a completion of a network device.
(print_completions): Likewise.
matters for very large fs when tree doesn't fit in cache.
(IH_KEY_OFFSET): Don't check for INFO->version. There are
actually old version file systems that use new version items.
(IH_KEY_ISTYPE): Likewise.
(reiserfs_dir): Likewise.
* stage2/boot.c (load_image): Check if DATA_LEN plus SECTOR_SIZE
is less than or equal to MULTIBOOT_SEARCH, instead of if
DATA_LEN is less than or equal to MULTIBOOT_SEARCH.
Reported by Neelkanth Natu <neelnatu@yahoo.com>.
robertmh