This is "belt and braces" with commit 12e20a6a69 (disk/diskfilter:
Check calloc() result for NULL): we end up trying to use too much memory
in situations like corrupted Linux software RAID setups purporting to
use a huge number of disks. Simply refuse to permit such configurations.
1024 is a bit arbitrary, yes, and I feel a bit like I'm tempting fate
here, but I think 1024 disks in an array (that GRUB has to read to boot!)
should be enough for anyone.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Now that we implemented support for the LoadFile2 protocol for initrd
loading, there is no longer a need to pass the initrd parameters via
the device tree. This means that when the LoadFile2 protocol is being
used, there is no reason to update the device tree in the first place,
and so we can ignore it entirely.
The only remaining reason to deal with the devicetree is if we are
using the "devicetree" command to load one from disk, so tweak the
logic in grub_fdt_install() to take that into account.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Recent Linux kernels will invoke the LoadFile2 protocol installed on
a well-known vendor media path to load the initrd if it is exposed by
the firmware. Using this method is preferred for two reasons:
- the Linux kernel is in charge of allocating the memory, and so it can
implement any placement policy it wants (given that these tend to
change between kernel versions),
- it is no longer necessary to modify the device tree provided by the
firmware.
So let's install this protocol when handling the "initrd" command if
such a recent kernel was detected (based on the PE/COFF image version),
and defer loading the initrd contents until the point where the kernel
invokes the LoadFile2 protocol.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When GRUB runs on top of EFI firmware, it only has access to block and
network device abstractions exposed by the firmware, and it is up to the
firmware to quiesce the underlying hardware when exiting boot services
and handing over to the OS.
This is especially important for network devices, to prevent incoming
packets from being DMA'd straight into memory after the OS has taken
over but before it has managed to reconfigure the network hardware.
GRUB handles this by means of the grub_net_fini_hw() preboot hook, which
is executed before calling into the booted image. This means that all
network devices disappear or become inoperable before the EFI stub
executes on EFI targeted builds. This is problematic as it prevents the
EFI stub from calling back into GRUB provided protocols such as
LoadFile2 for the initrd, which we will provide in a subsequent patch.
So add a flag that indicates to the network core that EFI network
devices should not be closed when grub_net_fini_hw() is called.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The way we load the Linux and PE/COFF image headers depends on a fixed
placement of the COFF header at offset 0x40 into the file. This is
a reasonable default, given that this is where Linux emits it today.
However, in order to comply with the PE/COFF spec, which allows this
header to appear anywhere in the file, let's ensure that we read the
header from where it actually appears in the file if it is not located
at offset 0x40.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Xen has its own version of the image header, to account for the
additional PE/COFF header fields. Since we are adding references to
those in the shared EFI loader code, update the common definitions
and drop the Xen specific one which no longer has a purpose.
Since in both cases, the call to grub_arch_efi_linux_check_image() is
preceded by a load of the image header, let's move the load into that
function, and rename it to grub_arch_efi_linux_load_image_header().
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The PE/COFF spec permits the COFF signature and file header to appear
anywhere in the file, and the actual offset is recorded in 4 byte
little endian field at offset 0x3c of the image.
When GRUB is emitted as a PE/COFF binary, we reuse the 128 byte MS-DOS
stub (even for non-x86 architectures), putting the COFF signature and
file header at offset 0x80. However, other PE/COFF images may use
different values, and non-x86 Linux kernels use an offset of 0x40
instead.
So let's get rid of the grub_pe32_header struct from pe32.h, given that
it does not represent anything defined by the PE/COFF spec. Instead,
introduce a minimal struct grub_msdos_image_header type based on the
PE/COFF spec's description of the image header, and use the offset
recorded at file position 0x3c to discover the actual location of the PE
signature and the COFF image header.
The remaining fields are moved into a struct grub_pe_image_header,
which we will use later to access COFF header fields of arbitrary
images (and which may therefore appear at different offsets)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_buffer_free() should handle NULL input pointer, similar to
grub_free(). If the pointer is not referencing any memory location,
grub_buffer_free() need not perform any function.
Fixes: CID 396931
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The dnode_get_path() traverses dnode structures to locate the dnode leaf
of a given path. When the leaf is a symlink to another path, it restarts
the traversal either from root or from a different path. In such cases,
dn_new must be re-initialized
Passes "make check".
Fixes: CID 86750
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Ross Philipson <ross.philipson@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The recent gnulib updates require an implementation of abort(), but the
current macro provided by changeset:
cd37d3d391 gnulib: Drop no-abort.patch
to config.h.in does not work with the clang compiler since it doesn't
provide a __builtin_trap() implementation, so this element of the
changeset needs to be reverted, and replaced.
After some discussion with Vladimir 'phcoder' Serbinenko and Daniel Kiper
it was suggested to bring back in the change from the changeset:
db7337a3d3 * grub-core/gnulib/regcomp.c (regerror): ...
Which implements abort() as an inline call to grub_abort(), but since
that was made static by changeset:
a8f15bceea * grub-core/kern/misc.c (grub_abort): Make static
it is also necessary to revert the specific part that makes it a static
function too.
Another implementation of abort() was found in grub-core/kern/compiler-rt.c
which needs to also be removed to be consistent.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In the function grub_cryptodisk_endecrypt(), a for loop is incrementing the
variable i by (1U << log_sector_size). The variable i is of type grub_size_t
which is a 64-bit unsigned integer on x86_64 architecture. On the other hand, 1U
is a 32-bit unsigned integer. By performing a left shift on a 32-bit value and
assigning it to a 64-bit variable, the 64-bit variable may have incorrect values
in the high 32-bits if the shift has an overflow. To avoid this, we replace 1U
with (grub_size_t)1.
Fixes: CID 307788
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Every heap grow will cause all disk caches invalidated which decreases
performance severely. This patch moves disk cache invalidation code to
the last of memory squeezing measures. So, disk caches are released only
when there are no other ways to get free memory.
Signed-off-by: Zhang Boyang <zhangboyang.id@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
The stack check logs a console message on failure, and the EFI API expects
a NULL terminated UCS-2 string. In order to define a UCS-2 string literal,
kernel.img on amd64 and i386 EFI targets is built with -fshort-wchar.
Also compile kernel.img on other EFI targets with -fshort-wchar.
Fixes: 37ddd94 (kern/efi/init: Log a console error during a stack check failure)
Reported-by: Glenn Washburn <development@efficientek.com>
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is useful on cloud instances with remote serial ports as it can be
difficult to connect "fast enough" to get the initial menu display
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
With wildly corrupt inputs, we can end up trying to calloc a very
large amount of memory, which will fail and give us a NULL pointer.
We need to check that to avoid a crash. (And, even if we blocked
such inputs, it is good practice to check the results of allocations
anyway.)
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A user can now specify UUID strings with dashes, instead of having to remove
dashes. This is backwards-compatibility preserving and also fixes a source
of user confusion over the inconsistency with how UUIDs are specified
between file system UUIDs and cryptomount UUIDs. Since cryptsetup, the
reference implementation for LUKS, displays and generates UUIDs with dashes
there has been additional confusion when using the UUID strings from
cryptsetup as exact input into GRUB does not find the expected cryptodisk.
A new function grub_uuidcasecmp() is added that is general enough to be used
other places where UUIDs are being compared.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Variable values may contain spaces at the end or newlines. However, when
displayed without quotes this is not obvious and can lead to confusion as
to the actual contents of variables. Also for some variables grub_env_get()
returns a NULL pointer instead of a pointer to an empty string and
previously would be printed as "var=(null)". Now such variables will be
displayed as "var=''".
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Fix the incorrect return value of __clzsi2() function.
Fixes: e795b90 (RISC-V: Add libgcc helpers for clz)
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We have multiple reports of things being slower with a 1 MiB initial static
allocation, and a report (more difficult to nail down) of a boot failure
as a result of the smaller initial allocation.
Make the initial memory allocation 32 MiB.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EFI_CONFORMANCE_PROFILES_TABLE_GUID is used for a table of GUIDs for conformance
profiles (cf. UEFI specification 2.10, 4.6.5 EFI_CONFORMANCE_PROFILE_TABLE).
The lsefisystab command is used to display installed EFI configuration tables.
Currently it only shows the GUID but not a short text for the table.
Provide a short text for the EFI_CONFORMANCE_PROFILES_TABLE_GUID.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Recently, ext4 added the large_dir feature, which adds support for
a 3 level htree directory support.
The GRUB supports existing file systems with htree directories by
ignoring their existence, and since the index nodes for the hash tree
look like deleted directory entries (by design), the GRUB can simply do
a brute force O(n) linear search of directories. The same is true for
3 level deep htrees indicated by large_dir feature flag.
Hence, it is safe for the GRUB to ignore the large_dir incompat feature.
Fixes: https://savannah.gnu.org/bugs/?61606
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
A new option is added to the loopback command, -D or --decompress, which
when specified transparently decompresses the backing file. This allows
compressed images to be used as if they were uncompressed.
Add documentation to support this change.
Suggested-by: Li Gen <ligenlive@gmail.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Store returned value from grub_getkey() in int instead of char to
prevent throwing away the extended bits. This was a problem because,
for instance, the left arrow key press would return
(GRUB_TERM_EXTENDED | 0x4b), which would have the GRUB_TERM_EXTENDED
thrown away leaving 0x4b or 'K'. These extended keys should either
work as intended or do nothing. This change has them do nothing,
instead of inserting a key not pressed by the user.
Signed-off-by: Li Gen <ligenlive@gmail.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The netmask configured in firmware is not respected on ppc64 (big endian).
When 255.255.252.0 is set as netmask in firmware, the following is the
value of bootpath string in grub_ieee1275_parse_bootpath():
/vdevice/l-lan@30000002:speed=auto,duplex=auto,192.168.88.10,,192.168.89.113,192.168.88.1,5,5,255.255.252.0,512
The netmask in this bootpath is not a problem, since it's a value specified
in firmware. But the value of subnet_mask.ipv4 was set with 0xfffffc00, and
__builtin_ctz(~grub_le_to_cpu32(subnet_mask.ipv4)) returned 16 (not 22).
As a result, 16 was used for netmask wrongly:
1111 1111 1111 1111 1111 1100 0000 0000 # subnet_mask.ipv4(=0xfffffc00)
0000 0000 1111 1100 1111 1111 1111 1111 # grub_le_to_cpu32(subnet_mask.ipv4)
1111 1111 0000 0011 0000 0000 0000 0000 # ~grub_le_to_cpu32(subnet_mask.ipv4)
and the count of zero with __builtin_ctz() can be 16. This patch changes
it as below:
1111 1111 1111 1111 1111 1100 0000 0000 # subnet_mask.ipv4(=0xfffffc00)
0000 0000 1111 1100 1111 1111 1111 1111 # grub_le_to_cpu32(subnet_mask.ipv4)
1111 1111 1111 1111 1111 1100 0000 0000 # grub_be_to_cpu32(subnet_mask.ipv4)
0000 0000 0000 0000 0000 0011 1111 1111 # ~grub_be_to_cpu32(subnet_mask.ipv4)
The count of zero with __builtin_clz() can be 22 (clz counts the number
of one bits preceding the most significant zero bit).
Signed-off-by: Masahiro Matsuya <mmatsuya@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Numerous register fields in the relocator state are simply not
used depending on the relocator. This causes Coverity to flag
these fields but there is no real bug here. Simply initializing
the variable to {0} solves the issue. Fixed in the else case too
for consistency.
Fixes: CID 396932
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a new --is-supported option to commands/efi/efifwsetup and
conditionalize display on it.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The "fwsetup" command is only registered if the firmware supports booting
to the firmware setup UI. But it could be possible that the GRUB config
already contains a "fwsetup" entry, because it was generated in a machine
that has support for this feature.
To prevent users getting an error like:
error: ../../grub-core/script/function.c:109:can't find command `fwsetup'.
if it is not supported by the firmware, let's just always register the
command but print a more accurate message if the firmware doesn't
support this option.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Coverity reports that dnode_end_t argument of fill_fs_info() is too
large to pass-by-value. Therefore, replace the argument with a pointer.
Fixes: CID 73631
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It was reported in the #grub IRC channel on Libera that decryption of
LUKS2 partitions fails with errors about invalid digests and/or salts.
In all of these cases, what failed was decoding the Base64
representation of these, where the encoded data contained invalid
characters.
As it turns out, the root cause is that json-c, which is used by
cryptsetup to read and write the JSON header, will escape some
characters by prepending a backslash when writing JSON strings by
default. Most importantly, json-c also escapes the forward slash, which
is part of the Base64 alphabet. Because GRUB doesn't know to unescape
such characters, decoding this string will rightfully fail.
Interestingly, this issue has until now only been reported by users of
Ubuntu 18.04. And a bit of digging in fact reveals that cryptsetup has
changed the logic in a054206d (Suppress useless slash escaping in json
lib, 2018-04-20), which has been released with cryptsetup v2.0.3. Ubuntu
18.04 is still shipping with cryptsetup v2.0.2 though, which explains
why this is not a more frequent issue.
Fix the issue by using our new grub_json_unescape() helper function
that handles unescaping for us.
Reported-by: Afdal
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <dkiper@net-space.pl>
JSON strings require certain characters to be encoded, either by using
a single reverse solidus character "\" for a set of popular characters,
or by using a Unicode representation of "\uXXXXX". The jsmn library
doesn't handle unescaping for us, so we must implement this functionality
for ourselves.
Add a new function grub_json_unescape() that takes a potentially
escaped JSON string as input and returns a new unescaped string.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <dkiper@net-space.pl>
In the case of an error grub_initrd_load() uses argv[] to print the
filename that caused the error. It is also possible to obtain the
filename from the file handles and there is no need to duplicate that
information in argv[], so let's drop it.
Signed-off-by: Nikita Ermakov <arei@altlinux.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/loader/i386/bsdXX.c and grub-core/loader/multiboot_elfxx.c, error
conditionals are simplified to statements such as "if (err)". Even though the
assumption that non-zero values give errors is correct, it would be clearer and
more consistent to compare these conditionals to GRUB_ERR_NONE.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In bsdXX.c and multiboot_elfxx.c, e_phnum is used to obtain the number of
program header table entries, but it wasn't being checked if the value was
there.
According to the elf(5) manual page,
"If the number of entries in the program header table is larger than or equal to
PN_XNUM (0xffff), this member holds PN_XNUM (0xffff) and the real number of
entries in the program header table is held in the sh_info member of the
initial entry in section header table. Otherwise, the sh_info member of the
initial entry contains the value zero."
Since this check wasn't being made, grub_elfXX_get_phnum() is being added to
elfXX.c to make this check and use e_phnum if it doesn't have PN_XNUM as a
value, else use sh_info. We also need to make sure e_phnum isn't greater than
PN_XNUM and sh_info isn't less than PN_XNUM.
Note that even though elf.c and elfXX.c are located in grub-core/kern, they are
compiled as modules and don't need the EXPORT_FUNC() macro to define the functions
in elf.h.
Also, changed casts of phnum to match variables being set as well as dropped
casts when unnecessary.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In multiboot_elfxx.c, e_shstrndx is used to obtain the section header table
index of the section name string table, but it wasn't being checked if the value
was there.
According to the elf(5) manual page,
"If the index of section name string table section is larger than or equal to
SHN_LORESERVE (0xff00), this member holds SHN_XINDEX (0xffff) and the real
index of the section name string table section is held in the sh_link member of
the initial entry in section header table. Otherwise, the sh_link member of the
initial entry in section header table contains the value zero."
Since this check wasn't being made, grub_elfXX_get_shstrndx() is being added to
elfXX.c to make this check and use e_shstrndx if it doesn't have SHN_XINDEX as a
value, else use sh_link. We also need to make sure e_shstrndx isn't greater than
or equal to SHN_LORESERVE and sh_link isn't less than SHN_LORESERVE.
Note that even though elf.c and elfXX.c are located in grub-core/kern, they are
compiled as modules and don't need the EXPORT_FUNC() macro to define the functions
in elf.h.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In bsdXX.c and multiboot_elfxx.c, e_shnum is used to obtain the number of
section header table entries, but it wasn't being checked if the value was
there.
According to the elf(5) manual page,
"If the number of entries in the section header table is larger than or equal to
SHN_LORESERVE (0xff00), e_shnum holds the value zero and the real number of
entries in the section header table is held in the sh_size member of the initial
entry in section header table. Otherwise, the sh_size member of the initial
entry in the section header table holds the value zero."
Since this check wasn't being made, grub_elfXX_get_shnum() is being added to
elfXX.c to make this check and use whichever member doesn't have a value of
zero. If both are zero, then we must return an error. We also need to make sure
that e_shnum doesn't have a value greater than or equal to SHN_LORESERVE and
sh_size isn't less than SHN_LORESERVE.
In order to get this function to work, the type ElfXX_Shnum is being added where
Elf32_Shnum defines Elf32_Word and Elf64_Shnum defines Elf64_Xword. This new
type is needed because if shnum obtains a value from sh_size, sh_size could be
of type El32_Word for Elf32_Shdr structures or Elf64_Xword for Elf64_Shdr
structures.
Note that even though elf.c and elfXX.c are located in grub-core/kern, they are
compiled as modules and don't need the EXPORT_FUNC() macro to define the functions
in elf.h.
For a few smaller changes, changed casts of shnum to match variables being set
as well as dropped casts when unnecessary and fixed spacing errors in bsdXX.c.
Also, shnum is an unsigned integer and is compared to int i in multiboot_elfxx.c,
it should be unsigned to match shnum.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The "ARM\x64" magic number in the file header identifies an image as one
that implements the bare metal boot protocol, allowing the loader to
simply move the file to a suitably aligned address in memory, with
sufficient headroom for the trailing .bss segment (the required memory
size is described in the header as well).
Note of this matters for GRUB, as it only supports EFI boot. EFI does
not care about this magic number, and nor should GRUB: this prevents us
from booting other PE linux images, such as the generic EFI zboot
decompressor, which is a pure PE/COFF image, and does not implement the
bare metal boot protocol.
So drop the magic number check.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Update the read hook to take into account encrypted volumes on a partition.
GRUB disk read hooks supply an absolute sector number at which the read is
started from. If the encrypted volume is in a partition, the sector number
given to the read hook will be offset by the number of the sector at the
start of the partition. The read hook then needs to subtract the partition
start from the supplied sector to get the correct start sector for the read
into the detached header file.
Reported-by: brutser <brutser@perso.be>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Tested-by: brutser <brutser@perso.be>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On my laptop running at 2.4GHz, if I run a VM where tsc calibration
using pmtimer will fail presuming a broken pmtimer, it takes ~51 seconds
to do so (as measured with the stopwatch on my phone), with a tsc delta
of 0x1cd1c85300, or around 125 billion cycles.
If instead of trying to wait for 5-200ms to show up on the pmtimer, we
try to wait for 5-200us, it decides it's broken in ~0x2626aa0 TSCs, aka
~2.4 million cycles, or more or less instantly.
Additionally, this reading the pmtimer was returning 0xffffffff anyway,
and that's obviously an invalid return. I've added a check for that and
0 so we don't bother waiting for the test if what we're seeing is dead
pins with no response at all.
If "debug" includes "pmtimer", you will see one of the following three
outcomes. If pmtimer gives all 0 or all 1 bits, you will see:
pmtimer: 0xffffff bad_reads: 1
pmtimer: 0xffffff bad_reads: 2
pmtimer: 0xffffff bad_reads: 3
pmtimer: 0xffffff bad_reads: 4
pmtimer: 0xffffff bad_reads: 5
pmtimer: 0xffffff bad_reads: 6
pmtimer: 0xffffff bad_reads: 7
pmtimer: 0xffffff bad_reads: 8
pmtimer: 0xffffff bad_reads: 9
pmtimer: 0xffffff bad_reads: 10
timer is broken; giving up.
This outcome was tested using qemu+kvm with UEFI (OVMF) firmware and
these options: -machine pc-q35-2.10 -cpu Broadwell-noTSX
If pmtimer gives any other bit patterns but is not actually marching
forward fast enough to use for clock calibration, you will see:
pmtimer delta is 0x0 (1904 iterations)
tsc delta is implausible: 0x2626aa0
This outcome was tested using GRUB patched to not ignore bad reads using
qemu+kvm with UEFI (OVMF) firmware, and these options:
-machine pc-q35-2.10 -cpu Broadwell-noTSX
If pmtimer actually works, you'll see something like:
pmtimer delta is 0xdff
tsc delta is 0x278756
This outcome was tested using qemu+kvm with UEFI (OVMF) firmware, and
these options: -machine pc-i440fx-2.4 -cpu Broadwell-noTSX
I've also tested this outcome on a real Intel Xeon E3-1275v3 on an Intel
Server Board S1200V3RPS using the SDV.RP.B8 "Release" build here:
https://www.intel.com/content/www/us/en/download/674448/firmware-update-for-the-intel-server-board-s1200rp-uefi-development-kit-release-vb8.html
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
luks2_get_keyslot() can fail for a variety of reasons that do not necessarily
mean the next keyslot should not be tried (e.g. a new kdf type). So always
try the next slot. This will make GRUB more resilient to non-spec json data
that 3rd party systems may add. We do not care if some of the keyslots are
unusable, only if there is at least one that is.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This command is meant to behave similarly to the "mode" command of the EFI
Shell application. In addition to allowing mode selection by giving the
number of columns and rows as arguments, the command allows specifying the
mode number to select the mode. Also supported are the arguments "min" and
"max", which set the mode to the minimum and maximum mode respectively as
calculated by the columns * rows of that mode.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When filesystem detection fails, all that's currently debug-logged is
a series of messages like:
grub-core/kern/fs.c:56:fs: Detecting ntfs...
grub-core/kern/fs.c:76:fs: ntfs detection failed.
repeated for each filesystem. Any messages provided to grub_error() by
the filesystem are lost, and one has to break out gdb to figure out what
went wrong.
With this change, one instead sees:
grub-core/kern/fs.c:56:fs: Detecting fat...
grub-core/osdep/hostdisk.c:357:hostdisk: reusing open device
`/path/to/device'
grub-core/kern/fs.c:77:fs: error: invalid modification timestamp for /.
grub-core/kern/fs.c:79:fs: fat detection failed.
in the debug prints.
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The way the code is written the tofree variable would never be passed to
the free_subchunk() function uninitialized. Coverity cannot determine
this and flags the situation as "Using uninitialized value...". The fix
is just to initialize the local struct.
Fixes: CID 314016
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Tested-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The event description is a string, so using grub_strcpy() is cleaner than
using grub_memcpy().
Signed-off-by: Lu Ken <ken.lu@intel.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
1. Use macro GRUB_ERR_NONE instead of hard code 0.
2. Keep lowercase of the first char for the status string of log event.
Signed-off-by: Lu Ken <ken.lu@intel.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Using the disk read hook mechanism, setup a read hook on the source disk
which will read from the given header file during the scan and recovery
cryptodisk backend functions. Disk read hooks are executed after the data
has been read from the disk. This is okay, because the read hook is given
the read buffer before its sent back to the caller. In this case, the hook
can then overwrite the data read from the disk device with data from the
header file sent in as the read hook data. This is transparent to the
read caller. Since the callers of this function have just opened the
source disk, there are no current read hooks, so there's no need to
save/restore them nor consider if they should be called or not.
This hook assumes that the header is at the start of the volume, which
is not the case for some formats (e.g. GELI). So GELI will return an
error if a detached header is specified. It also can only be used
with formats where the detached header file can be written to the
first blocks of the volume and the volume could still be unlocked.
So the header file can not be formatted differently from the on-disk
header. If these assumpts are not met, detached header file processing
must be specially handled in the cryptodisk backend module.
The hook will be called potentially many times by a backend. This is fine
because of the assumptions mentioned and the read hook reads from absolute
offsets and is stateless.
Also add a --header (short -H) option to cryptomount which takes a file
argument.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Daniel Axtens