Add support for memory alignment requirements and adjust a candidate
address to it before checking whether the block is large enough. This
must be done in this order since the alignment adjustment can make
a block smaller than what was requested.
None of the current callers has memory alignment requirements but the
ieee1275 loader for kernel and initrd will use it to convey them.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pavithra Prakash <pavrampu@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Carolyn Scherrer <cpscherr@us.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Return the allocated address of the memory block in the request structure
if a memory allocation was actually done. Leave the address untouched
otherwise. This enables a caller who wants to use the allocated memory
directly, rather than adding the memory to the heap, to see where memory
was allocated. None of the current callers need this but the converted
ieee1275 loader will make use of it.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pavithra Prakash <pavrampu@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Carolyn Scherrer <cpscherr@us.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Let the regions_claim() request structure's init_region determine whether
to call grub_mm_init_region() on it. This allows for adding memory to
GRUB's memory heap if init_region is set to true, or direct usage of the
memory otherwise. Set all current callers' init_region to true since they
want to add memory regions to GRUB's heap.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pavithra Prakash <pavrampu@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Carolyn Scherrer <cpscherr@us.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
The regions_claim() function limits the allocation of memory regions
by excluding certain memory areas from being used by GRUB. This for
example includes a gap between 640MB and 768MB as well as an upper
limit beyond which no memory may be used when an fadump is present.
However, the ieee1275 loader for kernel and initrd currently does not
use regions_claim() for memory allocation on PowerVM and KVM on Power
and therefore may allocate memory in those areas that it should not use.
To make the regions_claim() function more flexible and ultimately usable
for the ieee1275 loader, introduce a request structure to pass various
parameters to the regions_claim() function that describe the properties
of requested memory chunks. In a first step, move the total and flags
variables into this structure.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pavithra Prakash <pavrampu@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Carolyn Scherrer <cpscherr@us.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Add support for trusted boot using a vTPM 2.0 on the IBM IEEE1275
PowerPC platform. With this patch grub now measures text and binary data
into the TPM's PCRs 8 and 9 in the same way as the x86_64 platform
does.
This patch requires Daniel Axtens's patches for claiming more memory.
Note: The tpm_init() function cannot be called from GRUB_MOD_INIT() since
it does not find the device nodes upon module initialization and
therefore the call to tpm_init() must be deferred to grub_tpm_measure().
For vTPM support to work on PowerVM, system driver levels 1010.30
or 1020.00 are required.
Note: Previous versions of firmware levels with the 2hash-ext-log
API call have a bug that, once this API call is invoked, has the
effect of disabling the vTPM driver under Linux causing an error
message to be displayed in the Linux kernel log. Those users will
have to update their machines to the firmware levels mentioned
above.
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
On PowerVM, the first time we boot a Linux partition, we may only get
256MB of real memory area, even if the partition has more memory.
This isn't enough to reliably verify a kernel. Fortunately, the Power
Architecture Platform Reference (PAPR) defines a method we can call to ask
for more memory: the broad and powerful ibm,client-architecture-support
(CAS) method.
CAS can do an enormous amount of things on a PAPR platform: as well as
asking for memory, you can set the supported processor level, the interrupt
controller, hash vs radix mmu, and so on.
If:
- we are running under what we think is PowerVM (compatible property of /
begins with "IBM"), and
- the full amount of RMA is less than 512MB (as determined by the reg
property of /memory)
then call CAS as follows: (refer to the Linux on Power Architecture
Reference, LoPAR, which is public, at B.5.2.3):
- Use the "any" PVR value and supply 2 option vectors.
- Set option vector 1 (PowerPC Server Processor Architecture Level)
to "ignore".
- Set option vector 2 with default or Linux-like options, including a
min-rma-size of 512MB.
- Set option vector 3 to request Floating Point, VMX and Decimal Floating
point, but don't abort the boot if we can't get them.
- Set option vector 4 to request a minimum VP percentage to 1%, which is
what Linux requests, and is below the default of 10%. Without this,
some systems with very large or very small configurations fail to boot.
This will cause a CAS reboot and the partition will restart with 512MB
of RMA. Importantly, grub will notice the 512MB and not call CAS again.
Notes about the choices of parameters:
- A partition can be configured with only 256MB of memory, which would
mean this request couldn't be satisfied, but PFW refuses to load with
only 256MB of memory, so it's a bit moot. SLOF will run fine with 256MB,
but we will never call CAS under qemu/SLOF because /compatible won't
begin with "IBM".)
- unspecified CAS vectors take on default values. Some of these values
might restrict the ability of certain hardware configurations to boot.
This is why we need to specify the VP percentage in vector 4, which is
in turn why we need to specify vector 3.
Finally, we should have enough memory to verify a kernel, and we will
reach Linux. One of the first things Linux does while still running under
OpenFirmware is to call CAS with a much fuller set of options (including
asking for 512MB of memory). Linux includes a much more restrictive set of
PVR values and processor support levels, and this CAS invocation will likely
induce another reboot. On this reboot grub will again notice the higher RMA,
and not call CAS. We will get to Linux again, Linux will call CAS again, but
because the values are now set for Linux this will not induce another CAS
reboot and we will finally boot all the way to userspace.
On all subsequent boots, everything will be configured with 512MB of RMA,
so there will be no further CAS reboots from grub. (phyp is super sticky
with the RMA size - it persists even on cold boots. So if you've ever booted
Linux in a partition, you'll probably never have grub call CAS. It'll only
ever fire the first time a partition loads grub, or if you deliberately lower
the amount of memory your partition has below 512MB.)
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Robbie Harwood <rharwood@redhat.com>
We currently rely on some pretty fragile comparison by name to
identify whether a serial port being configured is identical
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Open Hack'Ware was the only user. It added a lot of complexity.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a new disk driver called obdisk for IEEE1275 platforms. Currently
the only platform using this disk driver is SPARC, however other IEEE1275
platforms could start using it if they so choose. While the functionality
within the current IEEE1275 ofdisk driver may be suitable for PPC and x86, it
presented too many problems on SPARC hardware.
Within the old ofdisk, there is not a way to determine the true canonical
name for the disk. Within Open Boot, the same disk can have multiple names
but all reference the same disk. For example the same disk can be referenced
by its SAS WWN, using this form:
/pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@w5000cca02f037d6d,0
It can also be referenced by its PHY identifier using this form:
/pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@p0
It can also be referenced by its Target identifier using this form:
/pci@302/pci@2/pci@0/pci@17/LSI,sas@0/disk@0
Also, when the LUN=0, it is legal to omit the ,0 from the device name. So with
the disk above, before taking into account the device aliases, there are 6 ways
to reference the same disk.
Then it is possible to have 0 .. n device aliases all representing the same disk.
Within this new driver the true canonical name is determined using the the
IEEE1275 encode-unit and decode-unit commands when address_cells == 4. This
will determine the true single canonical name for the device so multiple ihandles
are not opened for the same device. This is what frequently happens with the old
ofdisk driver. With some devices when they are opened multiple times it causes
the entire system to hang.
Another problem solved with this driver is devices that do not have a device
alias can be booted and used within GRUB. Within the old ofdisk, this was not
possible, unless it was the original boot device. All devices behind a SAS
or SCSI parent can be found. Within the old ofdisk, finding these disks
relied on there being an alias defined. The alias requirement is not
necessary with this new driver. It can also find devices behind a parent
after they have been hot-plugged. This is something that is not possible
with the old ofdisk driver.
The old ofdisk driver also incorrectly assumes that the device pointing to by a
device alias is in its true canonical form. This assumption is never made with
this new driver.
Another issue solved with this driver is that it properly caches the ihandle
for all open devices. The old ofdisk tries to do this by caching the last
opened ihandle. However this does not work properly because the layer above
does not use a consistent device name for the same disk when calling into the
driver. This is because the upper layer uses the bootpath value returned within
/chosen, other times it uses the device alias, and other times it uses the
value within grub.cfg. It does not have a way to figure out that these devices
are the same disk. This is not a problem with this new driver.
Due to the way GRUB repeatedly opens and closes the same disk. Caching the
ihandle is important on SPARC. Without caching, some SAS devices can take
15 - 20 minutes to get to the GRUB menu. This ihandle caching is not possible
without correctly having the canonical disk name.
When available, this driver also tries to use the deblocker #blocks and
a way of determining the disk size.
Finally and probably most importantly, this new driver is also capable of
seeing all partitions on a GPT disk. With the old driver, the GPT
partition table can not be read and only the first partition on the disk
can be seen.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Split up some of the functionality in grub_machine_get_bootlocation into
grub_ieee1275_get_boot_dev. This will allow for code reuse in a follow on
patch.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
IEEE Std 1275-1994 Standard for Boot (Initialization Configuration)
Firmware: Core Requirements and Practices
3.8.3 deblocker support package
Any package that uses the "deblocker" support package must define
the following method, which the deblocker uses as a low-level
interface to the device
block-size ( -- block-len ) Return "granularity" for accesses to this
device.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
IEEE 1275-1994 Standard for Boot (Initialization Configuration)
Firmware: Core Requirements and Practices
E.3.2.2 Bus-specific methods for bus nodes
A package implementing the scsi-2 device type shall implement the
following bus-specific method:
no-data-command ( cmd-addr -- error? )
Executes a simple SCSI command, automatically retrying under
certain conditions. cmd-addr is the address of a 6-byte command buffer
containing an SCSI command that does not have a data transfer phase.
Executes the command, retrying indefinitely with the same retry criteria
as retry-command.
error? is nonzero if an error occurred, zero otherwise.
NOTE no-data-command is a convenience function. It provides
no capabilities that are not present in retry-command, but for
those commands that meet its restrictions, it is easier to use.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
IEEE 1275-1994 Standard for Boot (Initialization Configuration)
Firmware: Core Requirements and Practices
E.3.2.2 Bus-specific methods for bus nodes
A package implementing the scsi-2 device type shall implement the
following bus-specific method:
set-address ( unit# target# -- )
Sets the SCSI target number (0x0..0xf) and unit number (0..7) to which
subsequent commands apply.
This function is for devices with #address-cells == 2
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Convert physical address to text unit-string.
Convert phys.lo ... phys-high, the numerical representation, to unit-string,
the text string representation of a physical address within the address
space defined by this device node. The number of cells in the list
phys.lo ... phys.hi is determined by the value of the #address-cells property
of this node.
This function is for devices with #address-cells == 4
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
decode-unit ( addr len -- phys.lo ... phys.hi )
Convert text unit-string to physical address.
Convert unit-string, the text string representation, to phys.lo ... phys.hi,
the numerical representation of a physical address within the address space
defined by this device node. The number of cells in the list
phys.lo ... phys.hi is determined by the value of the #address-cells
property of this node.
This function is for devices with #address-cells == 4
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It enables net boot even when there is no bootp/dhcp server.
* grub-core/net/drivers/ieee1275/ofnet.c: Add grub_ieee1275_parse_bootpath and
call it at grub_ieee1275_net_config_real.
* grub-core/kern/ieee1275/init.c: Add bootpath to grub_ieee1275_net_config.
* include/grub/ieee1275/ieee1275.h: Likewise.
* grub-core/disk/ieee1275/ofdisk.c (grub_ofdisk_open): Get the block
size of the disk.
* (grub_ofdisk_get_block_size): New function.
* (grub_ofdisk_prepare): Use the correct block size.
* (grub_ofdisk_read): Likewise.
* (grub_ofdisk_write): Likewise.
* include/grub/ieee1275/ofdisk.h (grub_ofdisk_get_block_size):
New proto.
GRUB_IEEE1275_FLAG_CURSORONOFF_ANSI_BROKEN on mac.
* grub-core/term/ieee1275/console.c (grub_console_init_lately): Use
ieee1275-nocursor if GRUB_IEEE1275_FLAG_CURSORONOFF_ANSI_BROKEN is set.
* grub-core/term/terminfo.c (grub_terminfo_set_current): Add new type
ieee1275-nocursor.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New value
GRUB_IEEE1275_FLAG_CURSORONOFF_ANSI_BROKEN.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New enum values
GRUB_IEEE1275_FLAG_NO_OFNET_SUFFIX and
GRUB_IEEE1275_FLAG_VIRT_TO_REAL_BROKEN.
* grub-core/net/drivers/efi/efinet.c (grub_efinet_findcards): Use
txbufsize.
* grub-core/kern/ieee1275/cmain.c (grub_ieee1275_find_options): Use
compatible property to check for macs. Set
GRUB_IEEE1275_FLAG_NO_OFNET_SUFFIX and
GRUB_IEEE1275_FLAG_VIRT_TO_REAL_BROKEN on macs.
* grub-core/net/drivers/ieee1275/ofnet.c (card_open): Don't add suffix
if GRUB_IEEE1275_FLAG_NO_OFNET_SUFFIX is set.
(send_card_buffer): Use txbuf.
(grub_ofnet_findcards): Allocate txbuf. Simplify code flow and move
nested function out of the parent while on it.
GRUB_IEEE1275_FLAG_NO_TREE_SCANNING_FOR_DISKS is set.
* grub-core/kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set
GRUB_IEEE1275_FLAG_NO_TREE_SCANNING_FOR_DISKS on IBM hardware.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New enum value
GRUB_IEEE1275_FLAG_NO_TREE_SCANNING_FOR_DISKS.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New enum value
GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS.
* grub-core/kern/ieee1275/mmap.c (grub_machine_mmap_iterate): Ignore
adress_cells and size:cells if GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS
is set.
* grub-core/kern/ieee1275/cmain.c (grub_ieee1275_find_options): Set
GRUB_IEEE1275_FLAG_BROKEN_ADDRESS_CELLS on powermacs.
Change ofnet.c to disknet.c and remove almost all ieee1275 specific code.
Create grub_net_malloc to handle iee1275 memory issues in a temporary solution.
GRUB_IEEE1275_FLAG_HAS_CURSORONOFF when appropriate.
* grub-core/term/ieee1275/ofconsole.c (grub_ofconsole_setcursor):
Use terminfo and don't use cursor-on/cursor-off unless it's known
to work.
* include/grub/ieee1275/ieee1275.h (grub_ieee1275_flag): New element
GRUB_IEEE1275_FLAG_HAS_CURSORONOFF.
an to list its information with command ls.
* fs/ieee1275/ofnet.c (grub_ofnet_open): parse parameters to determine netdisk data
* fs/ieee1275/ofnet.c (grub_ofnet_close): dealloc netdisk data
* include/grub/disk.h: added struct grub_netdisk_data
* include/grub/ieee1275/ofnet.h: added newline
* kern/disk.c (grub_disk_open): ignore partition check for netdisk
* normal/misc.c (grub_normal_print_device_info): added support to list netdisk information
