When GRUB image is netbooted on ppc64le, the keyboard input exhibits
significant latency, reports even say that characters are processed
about once per second. This issue makes interactively trying to debug
a ppc64le config very difficult.
It seems that the latency is largely caused by a 200 ms timeout in the
idle event loop, during which the network card interface is consistently
polled for incoming packets. Often, no packets arrive during this
period, so the timeout nearly always expires, which blocks the response
to key inputs.
Furthermore, this 200 ms timeout might not need to be enforced at this
basic layer, considering that GRUB performs synchronous reads and its
timeout management is actually handled by higher layers, not directly in
the card instance. Additionally, the idle polling, which reacts to
unsolicited packets like ICMP and SLAAC, would be fine at a less frequent
polling interval, rather than needing a timeout for receiving a response.
For these reasons, we believe the timeout in get_card_packet() should be
effectively removed. According to test results, the delay has disappeared,
and it is now much easier to use interactively.
Signed-Off-by: Michael Chang <mchang@suse.com>
Tested-by: Tony Jones <tonyj@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The measurements for confidential computing has been introduced in the
commit 4c76565b6 (efi/tpm: Add EFI_CC_MEASUREMENT_PROTOCOL support).
Recently the patch 30708dfe3 (tpm: Disable the tpm verifier if the TPM
device is not present) has been introduced to optimize the memory usage
when a TPM device is not available on platforms. This fix prevents the
tpm module to be loaded on confidential computing platforms, e.g. Intel
machines with TDX enabled, where the TPM device is not available.
In this patch, we propose to load the tpm module for this use case by
generalizing the tpm feature detection in order to cover CC platforms.
Basically, we do it by detecting the availability of the
EFI_CC_MEASUREMENT_PROTOCOL EFI protocol.
Fixes: https://savannah.gnu.org/bugs/?65821
Fixes: 30708dfe3 (tpm: Disable the tpm verifier if the TPM device is not present)
Signed-off-by: Hector Cao <hector.cao@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
This patch adds support for Radix, Xive and Radix_gtse in Options
vector5 which is required for KVM LPARs. KVM LPARs ONLY support
Radix and not the Hash. Not enabling Radix on any PowerVM KVM LPARs
will result in boot failure.
Signed-off-by: Avnish Chouhan <avnish@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We don't need any actual adjustments as we don't use the affected structures.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
ARRAY_SIZE() is the count of elements, but the element size is 4 bytes, so
this was only initing the first 1/4th of the table. Detected with valgrind.
This should only matter in error paths, and I've not been able to identify
any actual misbehaviour that results from reading in-bounds but uninited data.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This isn't intended to be a functional change, but it makes a lot of failures a lot
faster, which is extremely helpful for fuzzing.
Without this change, we keep trying and trying to read more bytes into our buffer,
never being able to (read always returns 0) and so we just return old buffer contents
over and over until the decompression process fails some other way.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add functionality to disable command line interface access and editing of GRUB
menu entries if GRUB image is built with --disable-cli.
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The EROFS [1] is a lightweight read-only filesystem designed for performance
which has already been shipped in most Linux distributions as well as widely
used in several scenarios, such as Android system partitions, container
images and rootfs for embedded devices.
This patch brings in the EROFS uncompressed support. Now, it's possible to
boot directly through GRUB with an EROFS rootfs.
Support for the EROFS compressed files will be added later.
[1] https://erofs.docs.kernel.org
Signed-off-by: Yifan Zhao <zhaoyifan@sjtu.edu.cn>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When handling a regular LVM volume, GRUB can fail with the message:
error: disk `lvmid/******-****-****-****-****-****-****/******-****-****-****-****-****-******' not found.
If the condition which triggers this exists, grub-probe will report the
error mentioned above. Similarly, the GRUB boot code will fail to detect
LVM volumes, resulting in a failure to boot off of LVM disks/partitions.
The condition can be created on any LVM VG by an LVM configuration change,
so any system with /boot on LVM can become unbootable at "any" time (after
any LVM configuration change).
The problem is caused by an incorrect computation of mda_end in disk/lvm.c,
when the metadata area wraps around. Apparently, this can start happening at
around 220 metadata changes to the VG.
Fixes: 879c4a834 (lvm: Fix two more potential data-dependent alloc overflows)
Fixes: https://savannah.gnu.org/bugs/?61620
Signed-off-by: Rogier <rogier777@gmail.com>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-By: Michael Chang <mchang@suse.com>
Give the user a chance to re-enter their cryptodisk passphrase after a typo,
rather than immediately failing (and likely dumping them into a GRUB shell).
By default, we allow 3 tries before giving up. A value in the
cryptodisk_passphrase_tries environment variable will override this default.
The user can give up early by entering an empty passphrase, just as they
could before this patch.
Signed-off-by: Forest <forestix@nom.one>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The test corpus for version-1 RAID generated an infinite recursion
in grub_partition_iterate() while attempting to read the superblock.
The reason for the issue was that the data region overlapped with
the superblock.
The infinite call loop looks like this:
grub_partition_iterate() -> partmap->iterate() ->
-> grub_disk_read() -> grub_disk_read_small() ->
-> grub_disk_read_small_real() -> grub_diskfilter_read() ->
-> read_lv() -> read_segment() -> grub_diskfilter_read_node() ->
-> grub_disk_read() -> grub_disk_read_small() -> ...
The fix adds checks for both the superblock region and the data
region when parsing the superblock metadata in grub_mdraid_detect().
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The "ground truth" stack protector cookie value is kept in a global
variable, and loaded in every function prologue and epilogue to store
it into resp. compare it with the stack slot holding the cookie.
If the comparison fails, the program aborts, and this might occur
spuriously when the global variable changes values between the entry and
exit of a function. This implies that assigning the global variable at
boot should not involve any instrumented function calls, unless special
care is taken to ensure that the live call stack is synchronized, which
is non-trivial.
So avoid any function calls, including grub_memcpy(), which is
unnecessary given that the stack cookie is always a suitably aligned
variable of the native word size.
While at it, leave the last byte 0x0 to avoid inadvertent unbounded
strings on the stack.
Note that the use of __attribute__((optimize)) is described as
unsuitable for production use in the GCC documentation, so let's drop
this as well now that it is no longer needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a new keyword, "depends", to the module definition syntax
used in Makefile.core.def. This allows specifying explicit module
dependencies together with the module definition.
Do not track the "extra_deps.lst" file in the repository anymore,
it is now auto-generated.
Make use of this new keyword in the bli module definition.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The CMOS actually exists on most EFI platforms and in some cases is used to
store useful data that makes it justifiable for GRUB to read/write it.
As for date and time keep using EFI API and not CMOS one.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When enabling gfxmenu and choosing to boot the Xen hypervisor from its
menu, an error occurred:
error: ../../grub-core/video/bitmap_scale.c:42:null src bitmap in grub_video_create_scaled.
The error is returned by grub_video_bitmap_create_scaled() when the
source pixmap is not there. The init_background() uses it to scale up
the background image so it can fully fit into the screen resolution.
However not all backgrounds are set by a image, i.e. the "desktop-image"
property of the theme file. Instead a color code may be used, for
example OpenSUSE's green background uses "desktop-color" property:
desktop-color: "#0D202F"
So it is absolutely fine to call init_background() without a raw pixmap
if color code is used. A missing check has to be added to ensure the
grub_errno will not be erroneously set and gets in the way of ensuing
boot process.
The reason it happens sporadically is due to grub_errno is reset to
GRUB_ERR_NONE in other places if a function's error return can be
ignored. In particular this hunk in grub_gfxmenu_create_box() does the
majority of the reset of grub_errno returned by init_background(), but
the path may not be always chosen.
grub_video_bitmap_load (&box->raw_pixmaps[i], path);
grub_free (path);
/* Ignore missing pixmaps. */
grub_errno = GRUB_ERR_NONE;
In any case, we cannot account on such random behavior and should only
return grub_errno if it is justified.
On the occasion move the grub_video_bitmap struct definition to the
beginning of the function.
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The directory extent list does not have to be a continuous list of data
blocks. When GRUB tries to read a non-existant member of the list,
grub_xfs_read_file() will return a block of zero'ed memory. Checking for
a zero'ed magic number is sufficient to skip this non-existant data block.
Prior to commit 07318ee7e (fs/xfs: Fix XFS directory extent parsing)
this was handled as a subtle side effect of reading the (non-existant)
tail data structure. Since the block was zero'ed the computation of the
number of directory entries in the block would return 0 as well.
Fixes: 07318ee7e (fs/xfs: Fix XFS directory extent parsing)
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2254370
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Reviewed-By: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The file_get_fs_options() takes a mach_msg_type_number_t, 32-bit,
not a size_t, 64-bit on 64-bit platforms.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/loader/i386/multiboot_mbi.c, Coverity spotted redundant code where
the variable err was being set to GRUB_ERR_NONE and then being overwritten
later without being used. Since this is unnecessary, we can remove the code
that sets err to GRUB_ERR_NONE.
Fixes: CID 428877
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/osdep/unix/getroot.c, Coverity spotted redundant code where the
double pointer os_dev was being set to 0 and then being overwritten later
without being used. Since this is unnecessary, we can remove the code that
sets os_dev to 0.
Fixes: CID 428875
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/fs/jfs.c, Coverity spotted redundant code where the pointer diro
was being set to 0 and then being overwritten later without being used. Since
this is unnecessary, we can remove the code that sets diro to 0.
Fixes: CID 428876
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Generating the canary at build time allows the canary to be different for
every build which could limit the effectiveness of certain exploits.
Fallback to the statically generated random bytes if /dev/urandom is not
readable, e.g. Windows.
On 32-bit architectures, which use a 32-bit canary, reduce the canary to
4 bytes with one byte being NUL to filter out string buffer overflow attacks.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The canary, __stack_chk_guard, is in the BSS and so will get initialized to
zero if it is not explicitly initialized. If the UEFI firmware does not
support the RNG protocol, then the canary will not be randomized and will
be zero. This seems like a possibly easier value to write by an attacker.
Initialize canary to static random bytes, so that it is still random when
there is no RNG protocol. Set at least one byte to NUL to protect against
string buffer overflow attacks [1]. Code that writes NUL terminated strings
will terminate when a NUL is encountered in the input byte stream. So the
attacker will not be able to forge the canary by including it in the input
stream without terminating the string operation and thus limiting the
stack corruption.
[1] https://www.sans.org/blog/stack-canaries-gingerly-sidestepping-the-cage/
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
In grub-core/gfxmenu/gui_image.c, Coverity detected a double free in the
function load_image(). The function checks if self->bitmap and self->raw_bitmap
aren't NULL and then frees them. In the case self->bitmap and self->raw_bitmap
are the same, only self->raw_bitmap is freed which would also free the memory
used by self->bitmap. However, in this case self->bitmap isn't being set to NULL
which could lead to a double free later in the code. After self->raw_bitmap is
freed, it gets set to the variable bitmap. If this variable is NULL, the code
could have a path that would free self->bitmap a second time in the function
rescale_image().
Fixes: CID 292472
Signed-off-by: Alec Brown <alec.r.brown@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
According to the ACPI specification the XSDT Entry field contains an array
of 64-bit physical addresses which points to other DESCRIPTION_HEADERs. However,
the entry_ptr iterator is defined as a 32-bit pointer. It means each 64-bit
entry in the XSDT table is treated as two separate 32-bit entries then. Fix the
issue by using correct addresses sizes when processing RSDT and XSDT tables.
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
NetBSD uses slightly different function names for the same functions.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There is some variance in how compiler treats sizeof() especially
on 32-bit platforms where it can be naturally either int or long.
Explicit cast solves the issue.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The HAVE_LIBZFS is defined by libzfs test and hence conflicts with
manual definition. On NetBSD it ends up detecting zfs but not detecting
nvpair and creates confusion. Split them.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Wrong function and variable name cause a stupid compilation error on
NetBSD and OpenBSD. Only NetBSD and OpenBSD use this file. No other
platform is affected.
Additionally, define RAW_FLOPPY_MAJOR constant if it is missing.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
After recent change in blocklist types we have a type mismatch. Fixing it
requires a wrapper or large changes. I feel like wrapper makes more sense.
Without this patch we end up with a compilation problem and without wrapping
callback data is not passed properly anymore.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Variable e is set but never used. We can just remove it now.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We don't really control the small aspects of generated files and NetBSD
version has an unused variable that is then detected by gcc as warning
that is then promoted to error.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Current code implicitly assumes that aligning chunk_size + *kern_end is
the same as aligning on curload which is not the case because
chunk_size starts at zero even if *kern_end is unaligned and ALIGN_PAGE
moved curload to an aligned position but not *kern_end + chunk_size.
This fixes booting of FreeBSD with zfs module.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The commit 154dcb1ae (build: Allow explicit module dependencies) broke
out of tree builds by introducing the extra_deps.lst file into the
source tree but referencing it just by name in grub-core/Makefile.am.
Fix it by adding $(top_srcdir)/grub-core to the path.
Fixes: 154dcb1ae (build: Allow explicit module dependencies)
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Replace definition of HTTP_PORT with a pre-processor macro that converts
the constant to the correct grub_uint16_t type.
Change "port" local variable definition in http_establish() to have the
same type.
Signed-off-by: Mate Kukri <mate.kukri@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com
If validation has been disabled via MokSbState, secure boot on the
firmware is still enabled, and the kernel fails to boot.
This is a bit hacky, because shim_lock is not *fully* enabled, but
it triggers the right code paths.
Ultimately, all this will be resolved by shim gaining it's own image
loading and starting protocol, so this is more a temporary workaround.
Fixes: 6425c12cd (efi: Fallback to legacy mode if shim is loaded on x86 archs)
Cc: Peter Jones <pjones@redhat.com>
Cc: Michael Chang <mchang@suse.com>
Signed-off-by: Julian Andres Klode <julian.klode@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The bli module has a "hidden" dependency on the part_gpt module, which
is not picked up automatically by the build system. One purpose of the
bli module is to communicate the GPT UUID of the partition GRUB was
launched from to Linux user-space (systemd-gpt-auto-generator).
Without the part_gpt module, bli is not able to obtain the UUID. Since
bli does its work in the module initialization function, the order in
which the modules are loaded is also important: part_gpt needs to be
loaded before the bli module.
To solve this, track this dependency explicitly.
Note that the Boot Loader Interface specification, which bli aims to
implement, requires GPT formatted drives. The bli module ignores all
other partition formats.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The build system deduces inter-module dependencies from the symbols
required and exported by the modules. This works well, except for some
rare cases where the dependency is indirect or hidden. A module might
not make use of any function of some other module, but still expect its
functionality to be available to GRUB.
To solve this, introduce a new file, currently empty, called extra_deps.lst
to track these cases manually. This file gets processed in the same way
as the automatically generated syminfo.lst, making it possible to inject
data into the dependency resolver.
Since *.lst files are set to be ignored by git, add an exception for
extra_deps.lst.
Additionally, introduce a new keyword for the syminfo.lst syntax:
"depends" allows specifying a module dependency directly:
depends <module> <depdendency>...
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
On PowerVM and KVM on Power use the new memory allocation function that
honors restrictions on which memory GRUB can actually use. In the request
structure indicate the request for a single memory block along with
address alignment restrictions. Request direct usage of the memory block
by setting init_region to false (prevent it from being added to GRUB's
heap). Initialize the found addr to -1, so that -1 will be returned
to the loader in case no memory could be allocated.
Report an out-of-memory error in case the initrd could not be loaded.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pavithra Prakash <pavrampu@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Carolyn Scherrer <cpscherr@us.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Add support for memory alignment requirements and adjust a candidate
address to it before checking whether the block is large enough. This
must be done in this order since the alignment adjustment can make
a block smaller than what was requested.
None of the current callers has memory alignment requirements but the
ieee1275 loader for kernel and initrd will use it to convey them.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pavithra Prakash <pavrampu@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Carolyn Scherrer <cpscherr@us.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Return the allocated address of the memory block in the request structure
if a memory allocation was actually done. Leave the address untouched
otherwise. This enables a caller who wants to use the allocated memory
directly, rather than adding the memory to the heap, to see where memory
was allocated. None of the current callers need this but the converted
ieee1275 loader will make use of it.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pavithra Prakash <pavrampu@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Carolyn Scherrer <cpscherr@us.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Let the regions_claim() request structure's init_region determine whether
to call grub_mm_init_region() on it. This allows for adding memory to
GRUB's memory heap if init_region is set to true, or direct usage of the
memory otherwise. Set all current callers' init_region to true since they
want to add memory regions to GRUB's heap.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pavithra Prakash <pavrampu@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Carolyn Scherrer <cpscherr@us.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
The regions_claim() function limits the allocation of memory regions
by excluding certain memory areas from being used by GRUB. This for
example includes a gap between 640MB and 768MB as well as an upper
limit beyond which no memory may be used when an fadump is present.
However, the ieee1275 loader for kernel and initrd currently does not
use regions_claim() for memory allocation on PowerVM and KVM on Power
and therefore may allocate memory in those areas that it should not use.
To make the regions_claim() function more flexible and ultimately usable
for the ieee1275 loader, introduce a request structure to pass various
parameters to the regions_claim() function that describe the properties
of requested memory chunks. In a first step, move the total and flags
variables into this structure.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pavithra Prakash <pavrampu@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Carolyn Scherrer <cpscherr@us.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
XFS introduced 64-bit extent counters for inodes via a series of
upstream commits and the feature was marked as stable in v6.5 via
commit 61d7e8274cd8 (xfs: drop EXPERIMENTAL tag for large extent
counts).
Further, xfsprogs release v6.5.0 switched this feature on by default
in mkfs.xfs via commit e5b18d7d1d96 (mkfs: enable large extent counts
by default).
Filesystems formatted with large extent count support, nrext64=1, are
thus currently not recognizable by GRUB, since this is an incompat
feature. Add the required support so that those filesystems and inodes
with large extent counters can be read by GRUB.
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Tested-by: Marta Lewandowska <mlewando@redhat.com>
Tested-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
With new alignment specification it's easy to screw up. Fortunately if it
happens the size will be bigger than intended. Compile time assert will catch
this.
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Michael Chang